M306N5FCTFP Renesas Electronics America, M306N5FCTFP Datasheet - Page 281

• Manufacturer Part Number: M306N5FCTFP
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N5FCTFP

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 87
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

M16C/6N Group (M16C/6N5)
Rev.2.40
REJ09B0011-0240
21.3.4.9 Writing Command and Data
21.3.4.10 Wait Mode
21.3.4.11 Stop Mode
21.3.4.12 Low Power Dissipation Mode and On-chip Oscillator Low Power Dissipation Mode
Write commands and data to even addresses in the user ROM area.
When entering wait mode, set the FMR01 bit in the FMR0 register to 0 (CPU rewrite mode disabled)
before executing the WAIT instruction.
When entering stop mode, execute the instruction which sets the CM10 bit to 1 (stop mode) after setting
the FMR01 bit to 0 (CPU rewrite mode disabled) and disabling the DMA transfer.
If the CM05 bit is set to 1 (main clock stopped), do not execute the following commands:
• Program
• Block erase
• Erase all unlocked blocks
• Lock bit program
• Read lock bit status
Apr 14, 2006
page 259 of 372
21. Flash Memory Version