M306N5FCTFP Renesas Electronics America, M306N5FCTFP Datasheet - Page 145

• Manufacturer Part Number: M306N5FCTFP
• Description: IC M16C MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N5FCTFP

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 87
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

M16C/6N Group (M16C/6N5)
Rev.2.40
REJ09B0011-0240
Figure 13.20 Registers TB0MR to TB5MR in Pulse Period and Pulse Width Measurement Mode
NOTES:
Timer Bi Mode Register (i = 0 to 5)
b7
1. This flag is undefined after reset. When the TBiS bit = 1 (count starts), the MR3 bit is set to 0 (no overflow) by writing to the TBiMR
2. Selected by the PCLK0 bit in the PCLKR register.
Apr 14, 2006
b6
register at the next count timing or later after the MR3 bit was set to 1 (overflow). The MR3 bit cannot be set to 1 in a program.
Bits TB0S to TB2S are assigned to bits 5 to 7 in the TABSR register, and bits TB3S to TB5S are assigned to bits 5 to 7 in the TBSR
register.
b5
b4
b3
b2
1
b1
page 123 of 372
b0
0
Bit Symbol
TMOD0
TMOD1
TCK0
TCK1
MR0
MR1
MR2
MR3
TB0MR to TB2MR
TB3MR to TB5MR
Symbol
Operating mode
select bits
Measurement mode
select bits
Registers TB0MR and TB3MR
Set to 0 in pulse period and pulse width measurement mode
Registers TB1MR, TB2MR, TB4MR, and TB5MR
Nothing is assigned. If necessary, set to 0.
When read, the content is undefined.
Timer Bi overflow
flag
Count source
select bits
(1)
Bit Name
039Bh to 039Dh
01DBh to 01DDh
Address
1 0 : Pulse period / pulse width measurement mode
0 0 : Pulse period measurement
0 1 : Pulse period measurement
1 0 : Pulse width measurement
1 1 : Do not set a value
b7 b6
b1 b0
b3 b2
0 : Timer did not overflow
1 : Timer has overflowed
0 0 : f1 or f2
0 1 : f8
1 0 : f32
1 1 : fC32
(Measurement between a falling edge and the
next falling edge of measured pulse)
(Measurement between a rising edge and the next
rising edge of measured pulse)
(Measurement between a falling edge and the
next rising edge of measured pulse and between
a rising edge and the next falling edge)
(2)
00XX0000b
00XX0000b
After Reset
Function
RW
RW
RW
RW
RW
RW
RW
RW
RO
13. Timers
-