HD6417727BP160CV Renesas Electronics America, HD6417727BP160CV Datasheet - Page 106

• Manufacturer Part Number: HD6417727BP160CV
• Description: IC SH MPU ROMLESS 240BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727BP160CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 160MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.7 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-BGA
• Package: 240CSP
• Family Name: SuperH
• Maximum Speed: 160 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 104
• Interface Type: SCI/USB
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 2 CPU
2.4.2
Two different memory accesses are made with DSP instructions. The two kinds of instructions are
X and Y data transfer instructions (MOVX.W, MOVY.W) and single data transfer instructions
(MOVS.W, MOVSL). The data addressing is different for these two kinds of instruction. An
overview of the data transfer instructions is given in table 2.13.
Table 2.13 Overview of Data Transfer Instructions
Address register
Index register
Addressing
Modulo addressing
Data bus
Data length
Bus contention
Memory
Source register
Destination register
X/Y Data Addressing: With DSP instructions, the X and Y data memory can be accessed
simultaneously using the MOVX.W and MOVY.W instructions. Two address pointers are
provided for DSP instructions to enable simultaneous access to X and Y data memory. Only
pointer addressing can be used with DSP instructions; immediate addressing is not available.
Address registers are divided into two, with register R4 or R5 functioning as the X memory
address register (Ax), and register R6 or R7 as the Y memory address register (Ay). The following
three kinds of addressing can be used with X and Y data transfer instructions.
1. Non-update address register addressing:
Rev.6.00 Mar. 27, 2009 Page 48 of 1036
REJ09B0254-0600
The Ax and Ay registers are address pointers. They are not updated.
DSP Data Addressing
X/Y Data Transfer Processing
(MOVX.W, MOVY.W)
Ax: R4, R5, Ay: R6, R7
Ix: R8, Iy: R9
Nop/Inc (+2)/index addition:
post-increment
—
Possible
XDB, YDB
16 bits (word)
No
X/Y data memory
Dx, Dy: A0, A1
Dx: X0/X1, Dy: Y0/Y1
Single Data Transfer Processing
(MOVS.W, MOVS.L)
Nop/Inc (+2, +4)/index addition:
post-increment
Dec (–2, –4): pre-decrement
Not possible
A0G, A1G
A0G, A1G
As: R2, R3, R4, R5
Is: R8
LDB
16/32 bits (word/longword)
Yes
Entire memory space
Ds: A0/A1, M0/M1, X0/X1, Y0/Y1,
Ds: A0/A1, M0/M1, X0/X1, Y0/Y1,