HD64F3067RF20 Renesas Electronics America, HD64F3067RF20 Datasheet - Page 704

• Manufacturer Part Number: HD64F3067RF20
• Description: IC H8 MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3067RF20

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: H8
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 70
• Interface Type: SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 20 Power-Down State
Bit 1—Module Standby H1 (MSTPH1): Selects whether to place the SCI1 in standby.
Bit 0—Module Standby H0 (MSTPH0): Selects whether to place the SCI0 in standby.
20.2.3
MSTCRL is an 8-bit readable/writable register that controls the module standby function, which
places individual on-chip supporting modules in the standby state. Module standby can be
designated for the DMAC, 16-bit timer, DRAM interface, 8-bit timer, and A/D converter modules.
MSTCRL is initialized to H'00 by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Rev. 4.00 Jan 26, 2006 page 680 of 938
REJ09B0276-0400
Bit 1
MSTPH1
0
1
Bit 0
MSTPH0
0
1
Bit
Initial value
Read/Write
Module Standby Control Register L (MSTCRL)
Description
SCI1 operates normally
SCI1 is in standby state
Description
SCI0 operates normally
SCI0 is in standby state
MSTPL7
R/W
7
0
Reserved bits
R/W
6
0
MSTPL5
R/W
5
0
MSTPL4
R/W
4
0
Module standby L7, L5 to L2, L0
These bits select modules to be
placed in standby
MSTPL3
R/W
3
0
MSTPL2
R/W
2
0
R/W
1
0
(Initial value)
(Initial value)
MSTPL0
R/W
0
0