HD64F2218TF24 Renesas Electronics America, HD64F2218TF24 Datasheet - Page 324

• Manufacturer Part Number: HD64F2218TF24
• Description: IC H8S MCU FLASH 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2218TF24

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: SCI, SmartCard, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: 3DK2218-SS - KIT DEV H8S/2218 WINDOWS SIDESHW
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

8.12.1
PGDDR specifies input or output for the pins of the port G.
Since PGDDR is a write-only register, the bit manipulation instructions must not be used to write
PGDDR. For details, see section 2.9.4, Accessing Registers Containing Write-Only Bits.
Notes: 1. The initial value becomes 1 in modes 4 and 5 and 0 in modes 6 and 7.
Rev.7.00 Dec. 24, 2008 Page 268 of 698
REJ09B0074-0700
Bit
7 to
5
4
3
2
1
0
Bit Name
⎯
PG4DDR*
PG3DDR*
PG2DDR*
PG1DDR
PG0DDR*
2. Reserved in the H8S/2212 Group. If this bit is read, an undefined value will be read.
3. Reserved in the H8S/2218 Group. If this bit is read, an undefined value will be read.
Port G Data Direction Register (PGDDR)
This bit cannot be modified.
This bit cannot be modified.
2
2
2
3
Initial Value
Undefined
0/1*
0
0
0
0
1
R/W
⎯
W
W
W
W
W
Description
Reserved
These bits are undefined and cannot be modified.
(H8S/2218 Group)
Modes 4 to 6:
Setting a PGDDR bit to 1 makes the PG4 to PG1 pins bus
control signal output pins, while clearing the bit to 0
makes the pins input ports.
Mode 7:
Setting a PGDDR bit to 1 makes the corresponding port G
pin an output port, while clearing the bit to 0 makes the
pin an input port.
(H8S/2212 Group)
Setting a PG1DDR bit to 1 makes the corresponding port
G pin an output port, while clearing the bit to 0 makes the
pin an input port.
(H8S/2212 Group)
When EMLE = 1: Pin PG0 function as the H-UDI (TDI)
pin.
When EMLE = 0: If a PG0DDR bit is set to 1, pin PG0
function as output ports. If a PG0DDR bit is cleared to 0,
pin PG0 function as input ports.