MC68HC16Z1CEH16 Freescale Semiconductor, MC68HC16Z1CEH16 Datasheet - Page 438

• Manufacturer Part Number: MC68HC16Z1CEH16
• Description: IC MCU 16BIT 16MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor
• Series: HC16r

Specifications of MC68HC16Z1CEH16

• Core Processor: CPU16
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 132-QFP
• Processor Series: HC16Z
• Core: CPU16
• Data Bus Width: 16 bit
• Controller Family/series: 68HC16
• No. Of I/o's: 26
• Ram Memory Size: 1KB
• Cpu Speed: 16MHz
• No. Of Timers: 2
• Embedded Interface Type: QSPI, SCI
• Rohs Compliant: Yes
• Package: 132PQFP
• Family Name: HC16
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 3.3|5 V
• Number Of Programmable I/os: 16
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 11
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 16 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

D.7.13 SPI Control Register
SPCR — SPI Control Register
SPIE — SPI Interrupt Enable
SPE — SPI Enable
WOMP — Wired-OR Mode for SPI Pins
MSTR — Master/Slave Mode Select
CPOL — Clock Polarity
CPHA — Clock Phase
LSBF — Least Significant Bit First
D-64
RESET:
SPIE
15
0
The SPCR contains parameters for configuring the SPI. The register can be read or
written at any time.
CPOL is used to determine the inactive state of the serial clock (SCK). It is used with
CPHA to produce a desired clock/data relationship between master and slave devices.
CPHA determines which edge of SCK causes data to change and which edge causes
data to be captured. CPHA is used with CPOL to produce a desired clock/data rela-
tionship between master and slave devices.
0 = SPI interrupts disabled.
1 = SPI interrupts enabled.
0 = SPI is disabled.
1 = SPI is enabled.
0 = Outputs have normal CMOS drivers.
1 = Pins designated for output by MDDR have open-drain drivers, regardless of
0 = SPI is a slave device.
1 = SPI is system master.
0 = The inactive state value of SCK is logic level zero.
1 = The inactive state value of SCK is logic level one.
0 = Data captured on the leading edge of SCK and changed on the trailing edge of
1 = Data is changed on the leading edge of SCK and captured on the trailing edge
0 = Serial data transfer starts with LSB.
1 = Serial data transfer starts with MSB.
SPE
14
0
whether the pins are used as SPI outputs or for general-purpose I/O, and re-
gardless of whether the SPI is enabled.
SCK.
of SCK.
WOMP
13
0
MSTR
12
0
Freescale Semiconductor, Inc.
CPOL
11
For More Information On This Product,
0
CPHA
10
0
Go to: www.freescale.com
REGISTER SUMMARY
LSBF
9
0
SIZE
8
1
7
0
6
0
5
0
4
0
SPBR[7:0]
3
0
M68HC16 Z SERIES
USER’S MANUAL
2
1
$YFFC38
1
0
0
0