MC68HC16Z1CEH16 Freescale Semiconductor, MC68HC16Z1CEH16 Datasheet - Page 405

• Manufacturer Part Number: MC68HC16Z1CEH16
• Description: IC MCU 16BIT 16MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor
• Series: HC16r

Specifications of MC68HC16Z1CEH16

• Core Processor: CPU16
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 132-QFP
• Processor Series: HC16Z
• Core: CPU16
• Data Bus Width: 16 bit
• Controller Family/series: 68HC16
• No. Of I/o's: 26
• Ram Memory Size: 1KB
• Cpu Speed: 16MHz
• No. Of Timers: 2
• Embedded Interface Type: QSPI, SCI
• Rohs Compliant: Yes
• Package: 132PQFP
• Family Name: HC16
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 3.3|5 V
• Number Of Programmable I/os: 16
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 11
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 16 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PADA[7:0] — Port ADA Data Pins
D.5.4 ADC Control Register 0
ADCTL0 — ADC Control Register 0
RES10 — 10-Bit Resolution
STS[1:0] — Sample Time Selection
PRS[4:0] — Prescaler Rate Selection
M68HC16 Z SERIES
USER’S MANUAL
15
RESET:
A read of PADA[7:0] returns the logic level of the port ADA pins. If an input is not at an
appropriate logic level (that is, outside the defined levels), the read is indeterminate.
Use of a port ADA pin for digital input does not preclude its simultaneous use as an
analog input.
ADCTL0 is used to select 8- or 10-bit conversions, sample time, and ADC clock fre-
quency. Writes to it have immediate effect.
Conversion results are appropriately aligned in result registers to reflect the number of
bits.
Total conversion time is the sum of initial sample time, transfer time, final sample time,
and resolution time. Initial sample time is fixed at two ADC clocks. Transfer time is
fixed at two ADC clocks. Resolution time is fixed at ten ADC clocks for an 8-bit con-
version and twelve ADC clocks for a 10-bit conversion. Final sample time is deter-
mined by the STS[1:0] field. Refer to
The ADC clock is derived from the system clock by a programmable prescaler. ADC
clock period is determined by the value of the PRS field in ADCTL0. The prescaler has
two stages. The first stage is a 5-bit modulus counter. It divides the system clock by
any value from two to 32 (PRS[4:0] = %00000 to %11111). The second stage is a di-
vide-by-two circuit. Refer to
0 = 8-bit conversion
1 = 10-bit conversion
14
13
12
NOT USED
Freescale Semiconductor, Inc.
STS[1:0]
11
For More Information On This Product,
Table D-26 Sample Time Selection
00
01
10
11
10
Table
Go to: www.freescale.com
REGISTER SUMMARY
9
D-27.
Table
8
RES10
16 ADC Clock Periods
2 ADC Clock Periods
4 ADC Clock Periods
8 ADC Clock Periods
7
0
D-26.
Sample Time
6
0
STS[1:0]
5
0
4
0
3
0
PRS[4:0]
2
0
$YFF70A
1
1
D-31
0
1