82P2282PF IDT, Integrated Device Technology Inc, 82P2282PF Datasheet - Page 41

• Manufacturer Part Number: 82P2282PF
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of 82P2282PF

• Screening Level: Industrial
• Pin Count: 100
• Mounting: Surface Mount
• Package Type: TQFP
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Not Compliant

IDT82P2282
3.8.2
chronization, CRC Multi-frame synchronization, and Channel Associated
Signaling (CAS) Multi-frame synchronization in the received data
stream. Figure 11 shows the searching process.
monitoring the received data stream. If there are any framing bit errors,
CAS Multi-Frame alignment pattern errors, CRC Multi-Frame alignment
pattern errors or CRC errors, the Frame Processor will indicate these
errors. The status of loss of frame, loss of Signaling Multi-Frame and
loss of CRC Multi-Frame can also be detected and declared based on
user-selectable criteria. A software reset can also make the Frame Pro-
cessor reframe.
output the extracted data on a separate pin. The Frame Processor also
extracts the contents of the International bits (from both the FAS and the
NFAS frames), the National bits and the Extra bits (from TS16 in the
frame 0 of the Signaling Multi-Frame), and stores these data in registers.
The CRC Sub Multi-Frame alignment 4 bit codeword in the National bit
positions Sa4 to Sa8 can also be extracted and stored in registers, and
updated every CRC Sub Multi-Frame.
of NFAS frames) and Remote Signaling Multi-Frame Alarm (bit 6 of
TS16 of the frame 0 of the Signaling Multi-Frame). The ‘de-bounced’
Remote Alarm and Remote Signaling Multi-Frame Alarm can be indi-
cated if the corresponding bit has been a certain logic for 1 or 4 consec-
utive times. The AIS (Alarm Indication Signal) Alarm can also be
detected. The Frame Processor can also declare a Red Alarm if the out-
of-frame condition has persisted for at least 100 ms.
occurrence of some events. The interrupts may be generated every
Basic Frame, CRC Sub Multi-Frame, CRC Multi-Frame or Signaling
Multi-Frame.
bit.
Functional Description
In E1 mode, the Frame Processor searches for Basic Frame syn-
Once the frame is synchronized, the Frame Processor keeps on
The Frame Processor can extract the data stream in TS16, and
The Framer Processor identifies the Remote Alarm bit (bit 3 of TS0
An interrupt output is provided to indicate status changes and the
The Frame Processor can also be bypassed by setting the UNFM
E1 MODE
41
DUAL T1/E1/J1 LONG HAUL / SHORT HAUL TRANSCEIVER
August 20, 2009