CV500BC051 Omron, CV500BC051 Datasheet - Page 61

• Manufacturer Part Number: CV500BC051
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC051

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-1-2
36
Data Links Procedures
Automatically Setting Data Links
1,2,3...
8. Start the data links.
9. Stop the data links.
Data link tables can be automatically created by setting the data link mode to
automatic data link table creation. Use the following procedure.
1. Install and wire the Units.
Note a) Data link Start/Stop Bit (N= unit number):
Note Data link Start/Stop Bit (N= unit number):
Start the data links.
Stop the data links.
a. Mount the Units to
b. Wire the Network.
the PLCs.
CS/CJ Series:
C200HX/HG/HE:
CVM1/CV Series: Word 0 of DM 2000 + 100
CQM1H Series:
Contents
b) The data links will not start if there is an error in the data link
Contents
Contents
CS/CJ Series:
C200HX/HG/HE:
CVM1/CV Series:
CQM1H Series:
tables in the startup node.
Switch the Data link
Start/Stop Bit (listed
below) from OFF to
ON using either the
Programming Device,
the user program, the
Controller Link Sup-
port Software or CX-
Programmer.
Switch the Data link
Start/Stop Bit (listed
below) from OFF to
ON using either the
Programming Device,
the user program, the
Controller Link Sup-
port Software or CX-
Programmer.
---
---
Word 0 of DM30000 + 100
AR 0700 (operating level #0),
AR 0700
AR 0704 (operating level #1)
Method
Method
Method
Word 0 of DM30000 + 100
AR 0700 (operating level #0),
AR 0704 (operating level #1)
Word 0 of DM 2000 + 100
AR 0700
Data link startup node
(The Start Bit can be
turned ON in more
then one node to
make sure the data
links start even when
the startup node is
down.)
Any node that is active
in the data link
All nodes
All nodes
Nodes
Nodes
Nodes
×
×
N
N
×
×
Section 2-1
N
N
155
155
61
68
Page
Page
Page