CV500BC051 Omron, CV500BC051 Datasheet - Page 54

• Manufacturer Part Number: CV500BC051
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BC051

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Application Precautions
Message Service
Procedure
1-5
Application Precautions
1,2,3...
1,2,3...
Note Routing tables are not required if all of the CVM1 and CV-series CPU Units if
Note The manufacturing date can be determined from the four-digit lot number on
Manually Setting Data Links
1. Register data link tables for all nodes using the Controller Link Support
2. Start the data links either using the Controller Link Support Software, CX-
Automatically Setting Data Links
1. Set the DM area of the startup node using the Programming Device.
2. Start the data links by turning ON the Start Bit from the Programming De-
Execute communications instructions in the program.
the Controller Link Network were manufactured on or after May 1996.
the side of the CPU Unit.
C200HX/HG/HE PLC
• Turn ON the terminating resistance switch only for the nodes at both ends
• Turn OFF the power of all the nodes on the network before connecting or
• Use the specified cable only.
• Set the same baud rate for all nodes on the same network.
• Be sure to set routing tables for CVM1 and CV-series PLCs. When a
CVM1 or
CV-series PLC
Software or CX-Programmer.
Programmer, or by turning ON the Start Bit from the Programming Device.
vice.
of the network and turn OFF the switch for all other nodes.
disconnecting a cable.
CVM1 or CV-series PLC is connected to the network, set routing tables at
all the nodes.
Lot No.: @
C
L
K
C
P
U
Manufactured after May 1996
C
K
L
C
U
P
Independent Controller Link Network
@
C200HX/HG/HE PLC
5
6 . . . . . Manufactured in May 1996
C
K
L
C
U
P
Indicates the last digit of the manufacturing
year. In this example, the year is 1996.
Indicates the month of manufacture. October,
November, and December are indicated by x, y,
and z respectively. In this example, the month is
May.
C
K
L
C
P
U
C200HX/
HG/HE
PLC
CVM1 or
CV-series PLC
C
L
K
C
K
L
C
U
P
CVM1 or
CV-series PLC
Manufactured after May 1996
Routing tables are necessary
at all the nodes.
CLK: Controller Link Unit
C
U
P
Routing tables not
necessary
Section 1-5
29