MC68HC908AP16CFA MOTOROLA [Motorola, Inc], MC68HC908AP16CFA Datasheet - Page 410

• Manufacturer Part Number: MC68HC908AP16CFA
• Description: Microcontrollers
• Manufacturer: MOTOROLA [Motorola, Inc]

Break Module (BRK)
23.3.3 TIMI and TIM2 During Break Interrupts
23.3.4 COP During Break Interrupts
23.4 Low-Power Modes
23.4.1 Wait Mode
23.4.2 Stop Mode
23.5 Break Module Registers
Data Sheet
410
A break interrupt stops the timer counters.
The COP is disabled during a break interrupt when V
the RST pin.
The WAIT and STOP instructions put the MCU in low power-
consumption standby modes.
If enabled, the break module is active in wait mode. In the break routine,
the user can subtract one from the return address on the stack if SBSW
is set. (see
bit by writing logic 0 to it.
A break interrupt causes exit from stop mode and sets the SBSW bit in
the break status register.
These registers control and monitor operation of the break module:
Freescale Semiconductor, Inc.
•
•
•
•
•
For More Information On This Product,
Break status and control register (BRKSCR)
Break address register high (BRKH)
Break address register low (BRKL)
SIM break status register (SBSR)
SIM break flag control register (SBFCR)
Section 9. System Integration Module
Go to: www.freescale.com
MC68HC908AP Family — Rev. 2.5
(SIM)) Clear the BW
TST
is present on
MOTOROLA