SC16IS740IPW PHILIPS [NXP Semiconductors], SC16IS740IPW Datasheet - Page 28

no-image

SC16IS740IPW

Manufacturer Part Number
SC16IS740IPW
Description
Single UART with I2C-bus/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
Manufacturer
PHILIPS [NXP Semiconductors]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SC16IS740IPW
Quantity:
949
Part Number:
SC16IS740IPW
Manufacturer:
NXP
Quantity:
505
Part Number:
SC16IS740IPW
Manufacturer:
NXP
Quantity:
20 000
Part Number:
SC16IS740IPW
0
Part Number:
SC16IS740IPW,112
Manufacturer:
JAMICON
Quantity:
101
Part Number:
SC16IS740IPWR
Manufacturer:
TI/德州仪器
Quantity:
20 000
NXP Semiconductors
SC16IS740_750_760_5
Product data sheet
8.7 Modem Status Register (MSR)
This 8-bit register provides information about the current state of the control lines from the
modem, data set, or peripheral device to the host. It also indicates when a control input
from the modem changes state.
Table 18.
[1]
Remark: The primary inputs RI, CD, CTS, DSR are all active LOW.
Bit
7
6
5
4
3
2
1
0
Only available on SC16IS750/SC16IS760.
Symbol
MSR[7]
MSR[6]
MSR[5]
MSR[4]
MSR[3]
MSR[2]
MSR[1]
MSR[0]
Modem Status Register bits description
Description
CD
through IOControl register bit 1, the state of CD pin can be read from this
bit. This bit is the complement of the CD input. Reading IOState bit 6 does
not reflect the true state of CD pin.
RI
IOControl register bit 1, the state of RI pin can be read from this bit. This bit
is the complement of the RI input. Reading IOState bit 6 does not reflect the
true state of RI pin.
DSR
through IOControl register bit 1, the state of DSR pin can be read from this
bit. This bit is the complement of the DSR input. Reading IOState bit 4 does
not reflect the true state of DSR pin.
CTS (active HIGH, logical 1). This bit is the complement of the CTS input.
Cleared on a read.
Rev. 05 — 16 November 2006
Single UART with I
CD
RI
DSR
CTS. Indicates that CTS input has changed state. Cleared on a read.
[1]
[1]
[1]
(active HIGH, logical 1). If GPIO7 is selected as RI modem pin through
[1]
[1]
. Indicates that RI input has changed state from LOW to HIGH.
(active HIGH, logical 1). If GPIO6 is selected as CD modem pin
[1]
. Indicates that CD input has changed state. Cleared on a read.
(active HIGH, logical 1). If GPIO4 is selected as DSR modem pin
. Indicates that DSR input has changed state. Cleared on a read.
Table 18
2
shows Modem Status Register bit settings.
C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
SC16IS740/750/760
© NXP B.V. 2006. All rights reserved.
28 of 62

Related parts for SC16IS740IPW