adc12d800rfrb National Semiconductor Corporation, adc12d800rfrb Datasheet - Page 14

• Manufacturer Part Number: adc12d800rfrb
• Description: 12-bit, 1.6/1.0 Gsps Rf Sampling Adc
• Manufacturer: National Semiconductor Corporation

www.national.com
K19/K20
K17/K18
Ball No.
L19/L20
L17/L18
DCLKQ+/-
DCLKI+/-
ORQ+/-
ORI+/-
Name
TABLE 4. High-Speed Digital Outputs
Equivalent Circuit
14
Description
Data Clock Output for the I- and Q-channel data
bus. These differential clock outputs are used to
latch the output data and, if used, should always
be terminated with a 100Ω differential resistor
placed as closely as possible to the differential
receiver. Delayed and non-delayed data outputs
are supplied synchronously to this signal. In 1:2
Demux Mode or Non-Demux Mode, this signal is
at ¼ or ½ the sampling clock rate, respectively.
DCLKI and DCLKQ are always in phase with
each other, unless one channel is powered down,
and do not require a pulse from DCLK_RST to
become synchronized.
Out-of-Range Output for the I- and Q-channel.
This differential output is asserted logic-high
while the over- or under-range condition exists,
i.e. the differential signal at each respective
analog input exceeds the full-scale value. Each
OR result refers to the current Data, with which it
is clocked out. If used, each of these outputs
should always be terminated with a 100Ω
differential resistor placed as closely as possible
to the differential receiver.