PI7C7300DNAE Pericom Semiconductor, PI7C7300DNAE Datasheet - Page 43

• Manufacturer Part Number: PI7C7300DNAE
• Description: IC PCI-PCI BRIDGE 3PORT 272-BGA
• Manufacturer: Pericom Semiconductor

Specifications of PI7C7300DNAE

• Applications: *
• Interface: *
• Voltage - Supply: *
• Package / Case: 272-PBGA
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3 V to 3.6 V
• Supply Current (max): 660 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.1
5.2
Pericom Semiconductor
ADDRESS RANGES
PI7C7300D uses the following address ranges that determine which I/O and memory
transactions are forwarded from the primary PCI bus to the secondary PCI bus, and from
the secondary bus to the primary bus:
Transactions falling within these ranges are forwarded downstream from the primary PCI
bus to the two secondary PCI buses. Transactions falling outside these ranges are
forwarded upstream from the two secondary PCI buses to the primary PCI bus.
No address translation is required in PI7C7300D. The addresses that are not marked for
downstream are always forwarded upstream. However, if an address of a transaction
initiated from S1 bus is located in the marked address range for down-stream in S2 bus
and not in the marked address range for downstream in S1 bus, the transaction will be
forwarded to S2 bus instead of primary bus. By the same token, if an address of a
transaction initiated from S2 bus is located in the marked address range for downstream
in S1 bus and not in the marked address range for downstream in S2 bus, the transaction
will be forwarded to S1 bus instead of primary bus.
I/O ADDRESS DECODING
PI7C7300D uses the following mechanisms that are defined in the configuration space to
specify the I/O address space for downstream and upstream forwarding:
This section provides information on the I/O address registers and ISA mode. Section
5.4 provides information on the VGA modes.
To enable downstream forwarding of I/O transactions, the I/O enable bit must be set in
the command register in configuration space. All I/O transactions initiated on the primary
bus will be ignored if the I/O enable bit is not set. To enable upstream forwarding of I/O
transactions, the master enable bit must be set in the command register. If the master-
enable bit is not set, PI7C7300D ignores all I/O and memory transactions initiated on the
secondary bus.
The master-enable bit also allows upstream forwarding of memory transactions
if it is set.
CAUTION
If any configuration state affecting I/O transaction forwarding is changed by a
configuration write operation on the primary bus at the same time that I/O
Two 32-bit I/O address ranges
Two 32-bit memory-mapped I/O (non-prefetchable memory) ranges
Two 32-bit prefetchable memory address ranges
I/O base and limit address registers
The ISA enable bit
The VGA mode bit
The VGA snoop bit
Page 43 of 107
3-PORT PCI-TO-PCI BRIDGE
November 2005 - Revision 1.01
PI7C7300D