ST92T163R4T1 STMicroelectronics, ST92T163R4T1 Datasheet - Page 127

• Manufacturer Part Number: ST92T163R4T1
• Description: Microcontrollers (MCU) OTP EPROM 20K USB/I2
• Manufacturer: STMicroelectronics

Specifications of ST92T163R4T1

• Data Bus Width: 8 bit, 16 bit
• Program Memory Type: EPROM
• Program Memory Size: 20 KB
• Data Ram Size: 2 KB
• Interface Type: I2C, SCI, USB
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 64
• Number Of Timers: 2
• Operating Supply Voltage: 4 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Package / Case: TQFP-64
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit
• Lead Free Status / Rohs Status: No

MULTIFUNCTION TIMER (Cont’d)
TIMER MODE REGISTER (TMR)
R249 - Read/Write
Register Page: 10
Reset value: 0000 0000 (00h)
Bit 7 = OE1: Output 1 enable.
0: Disable the Output 1 (TxOUTB pin) and force it
1: Enable the Output 1 (TxOUTB pin)
Bit 6 = OE0: Output 0 enable.
0: Disable the Output 0 (TxOUTA pin) and force it
1: Enable the Output 0 (TxOUTA pin).
Bit 5 = BM: Bivalu e mode .
This bit works together with the RM1 and RM0 bits
to select the timer operating mode (see Table 4).
0: Disable bivalue mode
1: Enable bivalue mode
Bit 4 = RM1: REG1R mode .
This bit works together with the BM and RM0 bits
to select the timer operating mode. Refer to Table
4.
Note: This bit has no effect when the Bivalue
Mode is enabled (BM=1).
OE1
high.
The relevant I/O bit must also be set to Alternate
Function
high
The relevant I/O bit must also be set to Alternate
Function
7
OE0
BM
RM1 RM0 ECK REN
C0
0
Bit 3 = RM0: REG0R mode .
This bit works together with the BM and RM1 bits
to select the timer operating mode. Refer to Table
4.
Table 23. Timer Operating Modes
Bit 2 = ECK Timer clock control .
0: The prescaler clock source is selected depend-
1: Enter Parallel mode (for Timer 1 and Timer 3
Bit 1 = REN: Retrigger mode .
0: Enable retriggerable mode
1: Disable retriggerable mode
Bit 0 = CO: Continous/One shot mode .
0: Continuous mode (with autoreload on End of
1: One shot mode
ST92163 - MULTIFUNCTION TIMER (MFT)
BM RM1 RM0
1
1
0
0
0
0
ing on the IN0 - IN3 bits in the T_ICR register
only, no effect for Timer 0 and 2). See Section
0.1.2.12.
Count condition)
TMR Bits
x
x
0
1
0
1
0
1
0
0
1
1
Biload mode
Bicapture mode
Load from REG0R and Monitor on
REG1R
Load from REG0R and Capture on
REG1R
Capture on REG0R and Monitor on
REG1R
Capture on REG0R and REG1R
Timer Operating Modes
127/224