PIC18F65K90-I/MR Microchip Technology, PIC18F65K90-I/MR Datasheet - Page 317

• Manufacturer Part Number: PIC18F65K90-I/MR
• Description: 32kB Flash, 2kB RAM, 1kB EE, NanoWatt XLP, LCD 64 QFN 9x9x0.9mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F65K90-I/MR

• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Timers: 8
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 53
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN Exposed Pad
• Lead Free Status / Rohs Status: Details

REGISTER 21-6:
REGISTER 21-7:
 2009-2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5-2
bit 1
bit 0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
Note 1:
R/W-0
GCEN
R/W-1
MSK7
2:
If the I
(or writes to the SSPxBUF are disabled).
This register shares the same SFR address as SSPxADD and is only addressable in select MSSPx
operating modes. See
MSK0 is not used as a mask bit in 7-bit addressing.
GCEN: General Call Enable bit
1 = Enables interrupt when a general call address (0000h) is received in the SSPxSR
0 = General call address is disabled
ACKSTAT: Acknowledge Status bit
Unused in Slave mode.
ADMSK<5:2>: Slave Address Mask Select bits (5-Bit Address Masking mode)
1 = Masking of corresponding bits of SSPxADD is enabled
0 = Masking of corresponding bits of SSPxADD is disabled
ADMSK1: Slave Address Least Significant bit(s) Mask Select bit
In 7-Bit Addressing mode:
1 = Masking of SSPxADD<1> only is enabled
0 = Masking of SSPxADD<1> only is disabled
In 10-Bit Addressing mode:
1 = Masking of SSPxADD<1:0> is enabled
0 = Masking of SSPxADD<1:0> is disabled
SEN: Stretch Enable bit
1 = Clock stretching is enabled for both slave transmit and slave receive (stretch enabled)
0 = Clock stretching is disabled
MSK<7:0>: Slave Address Mask Select bit
1 = Masking of the corresponding bit of SSPxADD is enabled
0 = Masking of the corresponding bit of SSPxADD is disabled
ACKSTAT
2
R/W-0
C module is active, this bit may not be set (no spooling) and the SSPxBUF may not be written to
R/W-1
MSK6
SSPxCON2: MSSPx CONTROL REGISTER 2 (I
SSPxMSK: I
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
ADMSK5
R/W-0
R/W-1
MSK5
Section 21.4.3.4 “7-Bit Address Masking Mode”
2
C™ SLAVE ADDRESS MASK REGISTER (7-BIT MASKING MODE)
(1)
ADMSK4
R/W-0
R/W-1
MSK4
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC18F87K90 FAMILY
ADMSK3
R/W-0
R/W-1
MSK3
ADMSK2
2
R/W-0
R/W-1
MSK2
C™ SLAVE MODE)
for more details.
x = Bit is unknown
x = Bit is unknown
ADMSK1
R/W-0
R/W-1
MSK1
DS39957D-page 317
MSK0
SEN
R/W-0
R/W-1
(1)
(2)
bit 0
bit 0
(1)