UJA1065 NXP Semiconductors, UJA1065 Datasheet - Page 19

• Manufacturer Part Number: UJA1065
• Manufacturer: NXP Semiconductors

Specifications of UJA1065

• Lead Free Status / RoHS Status: Supplier Unconfirmed

NXP Semiconductors
UJA1065_7
Product data sheet
6.7.1 Mode control
6.7 CAN transceiver
The integrated high-speed CAN transceiver of the UJA1065 is an advanced ISO 11898-2
and ISO 11898-5 compliant transceiver. In addition to standard high-speed CAN
transceivers the UJA1065 transceiver provides the following features:
The controller of the CAN transceiver provides four modes of operation: Active mode,
On-line mode, On-line Listen mode and Off-line mode; see
In the Diagnosis register two dedicated CAN status bits (CANMD) are available to signal
the mode of the transceiver.
•
•
•
•
•
Enhanced error handling and reporting of bus and RXD/TXD failures; these failures
are separately identified in the System Diagnosis register
Integrated autonomous control system for determining the mode of the CAN
transceiver
Ground shift detection with two selectable warning levels, to detect possible local
ground problems before the CAN communication is affected
On-line Listen mode with global wake-up message filter allows partial networking
Bus connections are truly floating when power is off
Rev. 07 — 25 February 2010
High-speed CAN/LIN fail-safe system basis chip
Figure
8.
UJA1065
© NXP B.V. 2010. All rights reserved.
19 of 76