CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 27

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PLCs that are
accessible as target
PLCs
Note: The target PLC
is the PLC actually
being accessed, e.g.,
to upload/download
the PLC’s network
configurations.
Supported
communications
Online Connection
Information Window
Item
CS Series
CJ Series
Note: The CS/CJ-series PLC must have a lot number of 030201 or later (manufactured 1 February
The following communications are possible for a directly connected target PLC.
Supported network
communications
Supported serial
communications
Note: Accessing PLC Communications Across Network Layers
If relay network routing tables are set, a PLC on a different network layer than the network of the
PLC connected to the CX-Integrator can be set as the target PLC.
When the target PLC is online, Communications Units connected to the target PLC (referred to here
as simple “Communications Units”) are displayed as follows:.
Target Device, Target PLC CPU Unit model (network address) (node address)
Communications configuration information can be uploaded by right-clicking a Communications Unit
and selecting Transfer – Network to PC.
Series
• CPU Unit name [model] (network address) (-) (serial port FINS unit address)
• Communications Unit name [model] (network address) (node address) (unit number)
• Communications Unit name [model] (network address) (node address) (unit number)
2003 or later) to start the NS-Designer and transfer screen data to an NS-series PT from the
NS-Designer through the PLC. The following PLCs can be used:
CS1G-H, CS1H-H, CS1D-S, CJ1M, or CJ1H-H. (The CS1D-H cannot be used.)
CS1H
CS1G/CJ1G CS1G-CPU45/44/43/42(-V1)
CS1G-H
CS1H-H
CS1D-H
CS1D-S
CS1G/CJ1G CJ1G-CPU45/44
CJ1M
CJ1G-H
CJ1H-H
Device type
CS1H-CPU67/66/65/64/63(-V1)
CS1G-CPU45H/44H/43H/42H
CS1H-CPU67H/66H/65H/64H/63H
CS1D-CPU67H/65H
Note: When using a pre-Ver. 1.1
CS1D-CPU67S/65S/44S/42S
CJ1M-CPU23/22/21/13/12/11
CJ1G- CPU45H/44H/43H/42H
CJ1H-CPU67H/66H/65H
Ethernet (Access is possible only to CS/CJ-series PLCs, NS-series PTs,
and computers with FinsGateway on the Ethernet network. For
CVM1/CV-series PLCs, only display functions are supported.)
Controller Link (Access is possible only to CS/CJ-series PLCs, NS-series
PTs, and computers with FinsGateway on the Controller Link network.)
For C200H-series PLCs and CVM1/CV-series PLCs, only display
functions are supported.)
Note: When the Controller Link Network Diagnosis application is being
SYSMAC LINK (Monitoring is possible only to CS/CJ-series PLCs,
NS-series PTs, and computers with FinsGateway on the SYSMAC LINK
network.)
DeviceNet (CS/CJ-series DeviceNet Units, C200H DeviceNet Master
Units, or CVM1/CV-series DeviceNet Master Units)
Note: A C200H-DRM21-V1 or CVM1-DRM21-V1 DeviceNet Master Unit
CompoWay/F (CS/CJ-series CPU Units must be unit version 3.0 or later.)
Serial Communications Boards and Serial Communications Units must be
unit version 1.2 or later. Only slaves for which CPS files are installed on
the computer can be accessed.
NT Links (Connection is possible only for NS-series PTs with model
numbers ending in V1 or later.)
CS1D-H CPU Unit, use it as if it
were a CS1H-H CPU Unit.
used, it is possible to monitor and troubleshoot PLC models in the
Controller Link network other than CS/CJ-series PLCs.
can be used through a CS/CJ-series DeviceNet Unit.
Specification
1-2-1
CPU Unit model
CX-Integrator Specifications
1-2
Note: A CPU Unit with unit
Note: CompoWay/F cannot be
Note: CompoWay/F cannot be
Note: A CPU Unit with unit
used with a built-in serial
port on the CPU Unit.
version 3.0 or later must be
used when using
CompoWay/F with a
built-in serial port on the
CPU Unit
used with a built-in serial
port on the CPU Unit.
version 3.0 or later must
be used when using
CompoWay/F with a
built-in serial port on the
CPU Unit
Specifications
1-9