CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 16

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3
Application Precautions
General Communications Precautions
DeviceNet
• Do not turn OFF the power to the PLC or disconnect the cable connecting
• Before changing the operating mode, always confirm that doing so will not
• Always check the operation of parameters sufficiently before using them for
• Confirm that resetting CPU Bus Units and Special I/O Units will not
• Enable the scan list to before operating the system.
• When adding a new node to the network, make sure that the baud rate is
• Use specified communications cables.
• Do not extend connection distances beyond the ranges given in the
• Always turn OFF the power supply to the personal computer, Slaves, and
• Be sure that the communications cables and other items with locking
• Observe the following precautions when wiring the communications cable.
• Before touching the PCI Board, be sure to first touch a grounded metallic
Observe the following precautions when using the CX-Integrator.
the PLC when the CX-Integrator is online with the PLC. Doing so may cause
the computer running CX-Integrator to malfunction.
adversely affect system operation.
actual system operation.
adversely affect system operation before resetting these Units.
the same as other nodes.
specifications.
Communications Units before attempting any of the following.
devices are properly locked into place.
object in order to discharge any static build-up. Not doing so may result in
malfunction or damage.
• Attaching or detaching the DeviceNet Board or Card
• Separate the communications cables from the power lines or
• Do not bend the communications cables.
• Do not pull on the communications cables.
• Do not place heavy objects on top of the communications cables.
• Be sure to wire communications cable inside ducts.
• Use appropriate communications cables.
• Assembling the Units
• Setting rotary switches
• Connecting or wiring the cables
• Connecting or disconnecting connectors
high-tension lines.
3
Application Precautions
xvii