CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 173

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4-3
4-3-11
4-36
Manually Setting Data Links
Transferring the Data Link Table
Note
Transferring to Individual Nodes on the Network
Changes in Transferring Data Link Tables during Data Link Operation
As long as all the data link tables can be transferred to all of the PLCs attempted, Set
All Nodes for Network Operation can be selected to transfer the data link tables
simultaneously to multiple PLCs. If there are any PLCs with the power turned OFF, or
with disconnected cables, use the following method to transfer the data link table to
one PLC at a time.
1 Make sure that Set All Nodes for Network Operation is not selected in the Online
2 Select the transfer destination node address from the Node list in the Datalink
3 Select Online - Transfer to PLC. The following dialog box will be displayed.
4 Click the Yes Button.
Nodes can be added while data links are running if the following Controller Link
Units/Boards and Repeater Units (CS1W-RPT01) are used (CX-Programmer version
3.2 or higher).
• CS1W-CLK21-V1
• CS1W-CLK12-V1
• CS1W-CLK52-V1
• CJ1W-CLK21-V1
Note: Refer to the Controller Link Operation Manual for the procedure to add nodes and details
Menu.
Component.
An error list will be displayed.
The data link tables will be transferred.
The transfer results will be displayed.
on changing data link tables while data links are running.
• 3G8F7-CLK21-V1(-EV1)
• 3G8F7-CLK12-V1(-EV1)
• 3G8F7-CLK52-V1(-EV1)
Confirm that there is no
check mark.