CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 22

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1-1
1-1-2
1-1-2
1-1-3
1-4
The CX-Integrator
Functions According to Network
Functions According to Network
Connecting to the Relay PLC
The functions for each network are listed in the following table.
DeviceNet or CompoWay/F
Controller Link or SYSMAC LINK
Controller Link
NT Link
FINS networks, such as Ethernet, Controller
Link, SYSMAC LINK, and DeviceNet
Either of the following methods can be used to connect the CX-Integrator online to the
relay PLC.
Serial communications (Toolbus or Host Link Mode)
FINS network communications, such as Controller Link, SYSMAC LINK, Ethernet,
Ethernet FINS/TCP, or FinsGateway
Note: If the computer running the CX-Integrator is connected directly to a network, the network
address and network node can be specified to set any PLC on the local network or an
interconnected network as the relay PLC.
Network
A virtual network or virtual serial communications
configuration can be created offline and connected
device parameters can be set, uploaded,
downloaded, and compared.
User-set data link tables can be created offline
and then transferred online to CS/CJ-series PLCs.
Data link parameters can be set automatically
online and then transferred to CS/CJ-series PLCs.
A Controller Link Network Diagnostic Tool can be
started to diagnose Controller Link networks.
Settings for an NS-series PT with a model number
ending in V1 or later serially connected to a
CS/CJ-series PLC via NT Link can be
automatically detected and set for the serial port of
the CS/CJ-series PLC. This is called NT Link Auto
Online Setting function.
Routing tables can be set offline and then
transferred online to CS/CJ-series PLCs.
Functions