CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 194

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5-1-3
Operational Flowchart
1. Connect
2. Start
3. Select Network
4. Execute
5. Select
Diagnostics
Diagnosis
Operation
Using a CS/CJ-series PLC in a
Toolbus network (see note):
Note: If the PLC is a
CS/CJ-series model and the
network type is Toolbus, it isn’t
necessary to set the PLC
connection. The CX-Integrator
will connect to the PLC when
the automatically when the
Controller Link Network
Diagnostic Tool starts.
Connect online to the Controller Link Unit in
the target PLC and upload the network
configuration.
Select Tools – Controller Link tool –
Network Diagnosis to start the Controller
Link Network Diagnostic Tool.
If the Change Network Dialog Box is
displayed, select the network to be diagnosed.
A confirmation dialog box will be displayed.
Click the Yes Button to execute the network
status diagnosis operation.
Select the desired diagnosis operation from
the Diagnosis Menu.
5-1
Complete the connection to the
network that will be diagnosed.
Diagnostic Functions and Flowcharts
Refer to 2-3 Uploading Network Configurations and
Checking for Communications Unit Errors for details on
connecting online and uploading the network
configuration.
Using a PLC other than a CS/CJ-series PLC (or using
a network type other than Toolbus:
The Change Network Dialog Box is displayed only if
there are two or more networks available for diagnosis.
(If dialog box will not be displayed if there is just one
Controller Link Unit in the PLC or the relay network
The confirmation dialog box will be displayed if the
CX-Integrator is connected to the network to be
diagnosed. This operation is used to list the nodes in
the network and diagnose each node’s status
(normal/error). Click the No Button to cancel the
network status diagnosis in order to execute another
operation such as diagnosing a disconnection.
Once the Controller Link Network Diagnostic Tool has
been started, you can change the network to be
diagnosed. Refer to 5-2-6 Changing the Network To Be
Diagnosed.
Select PLCs – Set Connection, set the
PLC model, and set the network type.
5-1-3
Operational Flowchart
5-3