HD64F2134FA20 Renesas Electronics America, HD64F2134FA20 Datasheet - Page 527

• Manufacturer Part Number: HD64F2134FA20
• Description: IC H8S MCU FLASH 128K 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2134FA20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit 3—Acknowledge Bit Judgement Selection (ACKE): Specifies whether the value of the
acknowledge bit returned from the receiving device when using the I
and continuous transfer is performed, or transfer is to be aborted and error handling, etc.,
performed if the acknowledge bit is 1. When the ACKE bit is 0, the value of the received
acknowledge bit is not indicated by the ACKB bit, which is always 0.
In the H8S/2138 Group, the DTC can be used to perform continuous transfer. The DTC is
activated when the IRTR interrupt flag is set to 1 (IRTR is one of two interrupt flags, the other
being IRIC). When the ACKE bit is 0, the TDRE, IRIC, and IRTR flags are set on completion of
data transmission, regardless of the value of the acknowledge bit. When the ACKE bit is 1, the
TDRE, IRIC, and IRTR flags are set on completion of data transmission when the acknowledge
bit is 0, and the IRIC flag alone is set on completion of data transmission when the acknowledge
bit is 1.
When the DTC is activated, the TDRE, IRIC, and IRTR flags are cleared to 0 after the specified
number of data transfers have been executed. Consequently, interrupts are not generated during
continuous data transfer, but if data transmission is completed with a 1 acknowledge bit when the
ACKE bit is set to 1, the DTC is not activated and an interrupt is generated, if enabled.
Depending on the receiving device, the acknowledge bit may be significant, in indicating
completion of processing of the received data, for instance, or may be fixed at 1 and have no
significance.
Bit 3
ACKE
0
1
The value of the acknowledge bit is ignored, and continuous transfer is performed
If the acknowledge bit is 1, continuous transfer is interrupted
Description
Section 16 I
Rev. 4.00 Jun 06, 2006 page 471 of 1004
2
C Bus Interface [H8S/2138 Group Option]
2
C bus format is to be ignored
REJ09B0301-0400
(Initial value)