DF3048X16V Renesas Electronics America, DF3048X16V Datasheet - Page 651

• Manufacturer Part Number: DF3048X16V
• Description: MCU 5V 128K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of DF3048X16V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

19.5.8
Flash memory can be protected from programming and erasing by software or hardware methods.
These two protection modes are described below.
Software Protection: Prevents transitions to program mode and erase mode even if the P or E bit
is set in the flash memory control register (FLMCR). Details are as follows.
Protection
Block
protect
Emulation
protect
Notes: 1. Three modes: program-verify, erase-verify, and prewrite-verify.
2. Except in RAM areas overlapped onto flash memory.
3. All blocks are erase-disabled. It is not possible to specify individual blocks.
Protect Modes
Description
Individual blocks can be erase and
program-protected by the erase block
registers (EBR1 and EBR2). If EBR1 and
EBR2 are both set to H'00, all blocks are
erase- and program-protected.
When the RAMS bit is set in the RAM
control register (RAMCR), all blocks are
protected from both programming and
erasing.
Section 19 Flash Memory (H8/3048F: Dual Power Supply (V
Rev. 7.00 Sep 21, 2005 page 625 of 878
Program
Disabled
Disabled *
2
Erase
Disabled
Disabled *
Function
REJ09B0259-0700
3
Verify *
Enabled
Enabled
PP
= 12 V))
1