ATSAM3S4AA-MU Atmel, ATSAM3S4AA-MU Datasheet - Page 429

• Manufacturer Part Number: ATSAM3S4AA-MU
• Description: IC MCU 32BIT 256KB FLASH 48QFN
• Manufacturer: Atmel
• Series: SAM3Sr

Specifications of ATSAM3S4AA-MU

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 1.95 V
• Data Converters: A/D 8x10/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• Processor Series: ATSAM3x
• Core: ARM Cortex M3
• 3rd Party Development Tools: JTRACE-CM3, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: ATSAM3S-EK
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

26. Power Management Controller (PMC)
26.1
26.2
6500C–ATARM–8-Feb-11
Description
Embedded Characteristics
The Power Management Controller (PMC) optimizes power consumption by controlling all sys-
tem and user peripheral clocks. The PMC enables/disables the clock inputs to many of the
peripherals and the Cortex-M3 Processor.
The Supply Controller selects between the 32 kHz RC oscillator or the crystal oscillator. The
unused oscillator is disabled automatically so that power consumption is optimized.
By default, at startup the chip runs out of the Master Clock using the Fast RC oscillator running
at 4 MHz.
The user can trim the 8 and 12 MHz RC Oscillator frequency by software.
The Power Management Controller provides the following clocks:
Programmable Clock Outputs can be selected from the clocks provided by the clock generator
and driven on the PCKx pins.
• MCK, the Master Clock, programmable from a few hundred Hz to the maximum operating
• Processor Clock (HCLK), must be switched off when entering the processor in Sleep Mode.
• Free running processor Clock (FCLK)
• the Cortex-M3 SysTick external clock
• UDP Clock (UDPCK), required by USB Device Port operations.
• Peripheral Clocks, typically MCK, provided to the embedded peripherals (USART, SSC, SPI,
frequency of the device. It is available to the modules running permanently, such as the
Enhanced Embedded Flash Controller.
TWI, TC, HSMCI, etc.) and independently controllable. In order to reduce the number of clock
names in a product, the Peripheral Clocks are named MCK in the product datasheet.
SAM3S Preliminary
429