AT32UC3C0128C Atmel Corporation, AT32UC3C0128C Datasheet - Page 46

• Manufacturer Part Number: AT32UC3C0128C
• Manufacturer: Atmel Corporation

Specifications of AT32UC3C0128C

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 123
• Ext Interrupts: 144
• Usb Transceiver: 1
• Quadrature Decoder Channels: 2
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 7
• Twi (i2c): 3
• Uart: 5
• Can: 2
• Lin: 5
• Ssc: 1
• Ethernet: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 2000
• Analog Comparators: 4
• Resistive Touch Screen: No
• Dac Channels: 4
• Dac Resolution (bits): 12
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6 or 4.5 to 5.5
• Operating Voltage (vcc): 3.0 to 3.6 or 4.5 to 5.5
• Fpu: Yes
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 22
• Input Capture Channels: 12
• Pwm Channels: 20
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

6. Supply and Startup Considerations
6.1
6.1.1
6.1.2
6.1.3
6.1.3.1
32117C–AVR-08/11
Supply Considerations
Power Supplies
Voltage Regulators
Regulators Connection
5V Single Supply Mode
The AT32UC3C has several types of power supply pins:
•
•
•
•
•
•
•
•
•
See
For decoupling recommendations for the different power supplies, please refer to the schematic
checklist.
The AT32UC3C embeds two voltage regulators:
The AT32UC3C supports two power supply configurations.
In 5V single supply mode, the 1.8V internal regulator is connected to the 5V source (VDDIN_5
pin) and its output feeds VDDCORE.
• One 1.8V internal regulator that converts from VDDIN_5 to 1.8V. The regulator supplies the
• One 3.3V internal regulator that converts from VDDIN_5 to 3.3V. The regulator supplies the
• 5V single supply mode
• 3.3V single supply mode
VDDIO pins (VDDIO1, VDDIO2, VDDIO3): Power I/O lines. Two voltage ranges are available: 5V or
3.3V nominal. The VDDIO pins should be connected together.
VDDANA: Powers the Analog part of the device (Analog I/Os, ADC, ACs, DACs). 2 voltage ranges
available: 5V or 3.3V nominal.
VDDIN_5: Input voltage for the 1.8V and 3.3V regulators. Two Voltage ranges are available: 5V or
3.3V nominal.
VDDIN_33:
VDDCORE: Stabilization for the 1.8V voltage regulator, requires external capacitors.
GNDCORE: Ground pins for the voltage regulators and the core.
GNDANA: Ground pin for Analog part of the design
GNDPLL: Ground pin for the PLLs
GNDIO pins (GNDIO1, GNDIO2, GNDIO3): Ground pins for the I/O lines. The GNDIO pins should be
connected together.
output voltage on VDDCORE.
USB pads on VDDIN_33. If the USB is not used or if VDDIN_5 is within the 3V range, the
3.3V regulator can be disabled through the VREG33CTL field of the VREGCTRL SCIF
register.
– USB I/O power supply
– if the device is 3.3V powered: Input voltage, voltage is 3.3V nominal.
– if the device is 5V powered: stabilization for the 3.3V voltage regulator, requires external
”Electrical Characteristics” on page 1247
capacitors
for power consumption on the various supply pins.
AT32UC3C
46