AT32UC3C0128C Atmel Corporation, AT32UC3C0128C Datasheet - Page 1107

• Manufacturer Part Number: AT32UC3C0128C
• Manufacturer: Atmel Corporation

Specifications of AT32UC3C0128C

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 123
• Ext Interrupts: 144
• Usb Transceiver: 1
• Quadrature Decoder Channels: 2
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 7
• Twi (i2c): 3
• Uart: 5
• Can: 2
• Lin: 5
• Ssc: 1
• Ethernet: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 2000
• Analog Comparators: 4
• Resistive Touch Screen: No
• Dac Channels: 4
• Dac Resolution (bits): 12
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6 or 4.5 to 5.5
• Operating Voltage (vcc): 3.0 to 3.6 or 4.5 to 5.5
• Fpu: Yes
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 22
• Input Capture Channels: 12
• Pwm Channels: 20
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

36.6.4.3
36.6.4.4
32117C–AVR-08/11
Dual-sequencer mode (simultaneous sampling)
Sequencer behavior on a Start Of Conversion
Figure 36-2. Single Sequencer Chronogram (assuming SRES=8, SHD=0)
The ADC has the ability to sample two pairs of ADCINx inputs simultaneously (see
provided that one pair is from the inputs available on the sequencer 0 and the other is from the
inputs available on the sequencer 1 (see
pling mode, the SSMQ bit needs to be set in the CFG register.
Figure 36-3. Dual Sequencer Chronogram (assuming SRES=8, SHD=0)
In this chronogram, ADCCONV signal represents the value being sampled by the ADC
Thanks to the SOCB bit in the SEQCFGx register, 2 different sequencer behaviors are possible:
Table 36-5.
SOCB
0
1
Comment
All sequence conversions are performed on a SOC event.
A single conversion belonging to the sequence is performed on a SOC event.
SOCB Behavior
Figure
36-1). To put the ADC into simultaneous sam-
AT32UC3C
Figure
36-3),
1107