IDT82P2816BB IDT, Integrated Device Technology Inc, IDT82P2816BB Datasheet - Page 84

• Manufacturer Part Number: IDT82P2816BB
• Description: IC LIU T1/J1/E1 16+1CH 416-PBGA
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT82P2816BB

• Function: Line Interface Unit (LIU)
• Interface: E1, J1, T1
• Number Of Circuits: 1
• Voltage - Supply: 1.8V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: *
• Includes: Defect and Alarm Detection, Driver Over-Current Detection and Protection, LLOS Detection, PRBSARB / IB Detection and Generation
• Number Of Transceivers: 1
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Supply: -
• Power (watts): -
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant
• Other names: 82P2816BB

TCF0 - Transmit Configuration Register 0
Address: 004H, 044H, 084H, 0C4H, 104H, 144H, 184H, 1C4H, (CH1~CH8)
Type: Read / Write
Default Value: 00H
Programming Information
IDT82P2816
2 - 0
Bit
7
6
5
4
3
204H, 244H, 284H, 2C4H, 304H, 344H, 384H, 3C4H, (CH9~CH16)
7C4H (CH0)
7
-
T_TERM[2:0]
THZ_OC
T_SING
T_OFF
Name
OE
-
OE
6
Reserved.
This bit determines the output of the Line Driver, i.e., the output on the TTIPn and TRINGn pins.
0: High-Z. (default)
1: Normal operation.
This bit determines whether the transmitter is powered down.
0: Normal operation. (default)
1: Power down.
This bit determines the output of the Line Driver, i.e., the output on the TTIPn and TRINGn pins when TOC is detected.
0: The output current is limited to 100 mAp-p. (default)
1: The output current is limited to 100 mAp-p within the first 1 ms after the TOC is detected and then the output is in High-Z state
when the TOC is detected for more than 1 ms.
This bit determines the transmit line interface.
0: Transmit Differential line interface. Both TTIPn and TRINGn are used to transmit signal to the line side. (default)
1: Transmit Single Ended line interface. Only TTIPn is used to transmit signal. TRINGn should be left open.
These bits select the impedance matching mode of the transmit path to match the cable impedance.
000: The 100 Ω internal impedance matching is selected for T1 100 Ω twisted pair cable (with transformer). (default)
001: The 110 Ω internal impedance matching is selected for J1 110 Ω twisted pair cable (with transformer).
010: The 120 Ω internal impedance matching is selected for E1 120 Ω twisted pair cable (with transformer).
011: The 75 Ω internal impedance matching is selected for E1 75 Ω coaxial cable (with transformer).
100: The 100 Ω internal impedance matching is selected for T1 100 Ω twisted pair cable (transformer-less).
101: The 110 Ω internal impedance matching is selected for J1 110 Ω twisted pair cable (transformer-less).
110: The 120 Ω internal impedance matching is selected for E1 120 Ω twisted pair cable (transformer-less).
111: The external impedance matching is selected for E1 120 Ω twisted pair cable or E1 75 Ω coaxial cable (with transformer).
T_OFF
5
THZ_OC
4
16(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
84
T_SING
3
Description
T_TERM2
2
T_TERM1
1
February 6, 2009
T_TERM0
0