MC56F8006DEMO Freescale Semiconductor, MC56F8006DEMO Datasheet - Page 21

• Manufacturer Part Number: MC56F8006DEMO
• Description: DEMO BOARD FOR MC56F8006
• Manufacturer: Freescale Semiconductor
• Type: DSPr

Specifications of MC56F8006DEMO

• Contents: Board
• Processor To Be Evaluated: MC56F8006
• Interface Type: RS-232, USB
• Operating Supply Voltage: 3.3 V
• Silicon Manufacturer: Freescale
• Core Architecture: 56800/E
• Core Sub-architecture: 56800/E
• Silicon Core Number: MC56F
• Silicon Family Name: MC56F80xx
• Rohs Compliant: Yes
• For Use With/related Products: MC56F8006
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Freescale Semiconductor
(ANA3 and
(ANA0 and
(CLKO_0)
GPIOB3
(PWM5)
(CMP1_
GPIOB4
(MOSI)
(MISO)
Signal
ANB3)
ANB0)
(TIN3)
(RXD)
Name
(SDA)
OUT
(T0)
SOIC
28
11
13
LQFP
Table 5. 56F8006/56F8002 Signal and Package Information (continued)
32
16
19
LQFP
48
24
27
MC56F8006/MC56F8002 Digital Signal Controller, Rev. 3
Input/Open
Output
Output
Output
Output
Output
Output
Output
Output
Output
Output
Analog
Input/
Input/
Input/
Input/
Input/
Input/
-drain
Type
Input
Input
Input
enabled
enabled
internal
internal
During
Reset
pullup
pullup
Input,
Input,
State
Port B GPIO — This GPIO pin can be individually programmed as
an input or output pin.
MOSI — Master out/slave in. In master mode, this pin serves as the
data output. In slave mode, this pin serves as the data input.
TIN3 — Dual timer module channel 3 input.
ANA3 and ANB3 — Analog input to channel 3 of ADCA and ADCB.
PWM5 — The PWM channel 5.
CMP1_OUT— Analog comparator 1 output.
When used as an analog input, the signal goes to the ANA3 and
ANB3.
After reset, the default state is GPIOB3.
Port B GPIO — This GPIO pin can be individually programmed as
an input or output pin.
T0 — Dual timer module channel 0 input/output.
CLKO_0 — This is a buffered clock output; the clock source is
selected by clockout select (CLKOSEL) bits in the clock output
select register (CLKOUT) of the SIM.
MISO — Master in/slave out. In master mode, this pin serves as the
data input. In slave mode, this pin serves as the data output. The
MISO line of a slave device is placed in the high-impedance state if
the slave device is not selected.
SDA — The I
RXD — The SCI receive data input.
ANA0 and ANB0 — Analog input to channel 0 of ADCA and ADCB.
When used as an analog input, the signal goes to the ANA0 and
ANB0.
After reset, the default state is GPIOB4.
2
C serial data line.
Signal Description
Signal/Connection Descriptions
21