MC56F8006DEMO Freescale Semiconductor, MC56F8006DEMO Datasheet - Page 20

• Manufacturer Part Number: MC56F8006DEMO
• Description: DEMO BOARD FOR MC56F8006
• Manufacturer: Freescale Semiconductor
• Type: DSPr

Specifications of MC56F8006DEMO

• Contents: Board
• Processor To Be Evaluated: MC56F8006
• Interface Type: RS-232, USB
• Operating Supply Voltage: 3.3 V
• Silicon Manufacturer: Freescale
• Core Architecture: 56800/E
• Core Sub-architecture: 56800/E
• Silicon Core Number: MC56F
• Silicon Family Name: MC56F80xx
• Rohs Compliant: Yes
• For Use With/related Products: MC56F8006
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Signal/Connection Descriptions
(ANA12 and
20
CMP2_P3)
(ANA2 and
GPIOB1
GPIOB2
(CMP0_
(MISO)
Signal
ANB2)
(TIN2)
Name
(SDA)
OUT)
(SS)
SOIC
28
27
LQFP
Table 5. 56F8006/56F8002 Signal and Package Information (continued)
32
17
2
LQFP
48
25
2
MC56F8006/MC56F8002 Digital Signal Controller, Rev. 3
Input/Open
Output
Output
Output
Analog
Output
Output
Output
Analog
Output
Input/
Input/
-drain
Input/
Input/
Input/
Type
Input
input
enabled
enabled
internal
internal
During
Reset
pullup
pullup
Input,
Input,
State
Port B GPIO — This GPIO pin can be individually programmed as
an input or output pin.
SS — SS is used in slave mode to indicate to the SPI module that
the current transfer is to be received.
SDA — The I
ANA12 and CMP2_P3 — Analog input to channel 12 of ADCA and
Positive input 3 of analog comparator 2.
When used as an analog input, the signal goes to the ANA12 and
CMP2_P3.
After reset, the default state is GPIOB1.
Port B GPIO — This GPIO pin can be individually programmed as
an input or output pin.
MISO — Master in/slave out. In master mode, this pin serves as the
data input. In slave mode, this pin serves as the data output. The
MISO line of a slave device is placed in the high-impedance state if
the slave device is not selected.
TIN2 — Dual timer module channel 2 input.
ANA2 and ANB2 — Analog input to channel 2 of ADCA and ADCB.
CMP0_OUT— Analog comparator 0 output.
When used as an analog input, the signal goes to the ANA2 and
ANB2.
After reset, the default state is GPIOB2.
2
C serial data line.
Signal Description
Freescale Semiconductor