EQ-SFM-MAX-V1.3 Equinox Technologies, EQ-SFM-MAX-V1.3 Datasheet - Page 68

• Manufacturer Part Number: EQ-SFM-MAX-V1.3
• Description: MODULE FOR PPM3-MK2 I/O DRIVER
• Manufacturer: Equinox Technologies

Specifications of EQ-SFM-MAX-V1.3

• Accessory Type: I/O Driver Module
• For Use With/related Products: PPM3-MK2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 483-1013

4.2 Power Connectors (rear panel)
The PPM3 rear panel power connectors are shown in the figure below. The Jack Socket and 2-way
Molex connectors are wired in parallel internally. The input voltage for both connectors is 9.0 to 12.0V
DC regulated from an external power supply.
Fig. 3.2.1 PPM3 Module – Rear Panel Connectors
Key No
1
2
4.3 DC Power Cable Specification
The programmer is supplied with a DC power cable which plugs into the DC power connector jack
socket on the rear panel of the programmer. The other end of this cable is supplied with bare wire
ends for connecting to an external power supply. e.g. bench PSU.
Cable Specification:
PPM3 MKII Programmer - User Guide - V1.04 - 10
•
•
•
•
•
One end features a female 2.5mm DC jack plug
The other end of the cable is supplied with bare wire ends for connecting to an external power
supply. e.g. bench PSU.
The black lead with the white stripe is the +VE cable.
The all black lead is the GROUND cable.
The external voltage applied to the Jack Socket connector must be between 9.0 and 12.0V DC
regulated !
Function
DC Power Input (1)
DC Power Input (2)
Further description
th
May 2008
•
•
•
•
•
2.5mm Jack socket (centre positive)
Input voltage: 9.0 – 12.0V DC regulated
2-way Molex connector
Input voltage: 9.0 – 12.0V DC regulated
This connector is wired internally in parallel with
the jack socket input (1).
57