EQ-SFM-MAX-V1.3 Equinox Technologies, EQ-SFM-MAX-V1.3 Datasheet - Page 29

• Manufacturer Part Number: EQ-SFM-MAX-V1.3
• Description: MODULE FOR PPM3-MK2 I/O DRIVER
• Manufacturer: Equinox Technologies

Specifications of EQ-SFM-MAX-V1.3

• Accessory Type: I/O Driver Module
• For Use With/related Products: PPM3-MK2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 483-1013

2.2 Hardware Installation Procedure
Please follow the instructions below to set up the programmer hardware:
#
1a
1b
1c
2
2a
2b
18
Action
Ensure you are wearing an ESD strap
and/or you are working in an ESD
protected environment.
Remove programmer from all packaging
and place on a flat surface.
If you are planning to use the programmer
as a desktop programmer, affix the four
stick feet to the base of the enclosure.
Select + fit I/O Connector Module
Select the required ‘I/O Connection
Module’
eg. EQ-IOCON-1 Module
Fit the selected ‘I/O Connection Module’ to
the programmer
PPM3 MKII Programmer - User Guide - V1.04 - 10
Observation
The programmer I/O lines are ESD protected,
but it always good practice to take proper ESD
precautions. This can help to avoid ESD
damage to either the programmer or Target
System.
The four rubber feet are supplied separately in a
plastic bag.
For full details of which devices / algorithms
each I/O Connection Module supports, please
refer to the separate document ‘PPM3 I/O
Connectors Manual’.
The PPM3 programmer is supplied with two I/O
connection Modules as standard:
A module for supporting JTAG programming can
also be purchased as an optional extra:
•
•
•
•
•
•
EQ-IOCON-1
EQ-IOCON-2
EQ-IOCON-3
Remove selected ‘I/O Connection
Module’ from its packaging.
Position the module so that the long red
connector on the back of the module
matches up with the mating connector on
the PPM Module.
Gently apply pressure to both sides of
the module until it snaps securely into
place.
th
May 2008