EQ-SFM-MAX-V1.3 Equinox Technologies, EQ-SFM-MAX-V1.3 Datasheet - Page 52

• Manufacturer Part Number: EQ-SFM-MAX-V1.3
• Description: MODULE FOR PPM3-MK2 I/O DRIVER
• Manufacturer: Equinox Technologies

Specifications of EQ-SFM-MAX-V1.3

• Accessory Type: I/O Driver Module
• For Use With/related Products: PPM3-MK2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 483-1013

2.6.6 Remote Status LED’s
It is possible to connect remote Status LED’s to the PPM3 programmer. This can be useful if the
programmer is mounted underneath a Test Fixture thus obscuring the normal Status LED’s. The
Remote Status LED’s simply connect to the ‘Remote System Status’ port (J13 Molex Connector) as
detailed in the table below.
Fig. 2.6.6 Remote System Status Connector and pin-out
Connector
Pin Signal name Description / Function
1
2
3
4
5
6
The ANODE of each LED should be connected to the relevant ‘+’ connector and the CATHODE of
each LED should be wired to the relevant ‘-‘ connector. It is not necessary to insert a series resistor
with each LED as these are already included on the PPM3 circuit board.
PPM3 MKII Programmer - User Guide - V1.04 - 10
FAIL+
FAIL-
BUSY+
BUSY-
OK+
OK-
Connector pin-out
See table below
Connect to ANODE of FAIL LED
Connect to CATHODE of FAIL LED
Connect to ANODE of BUSY LED
Connect to CATHODE of BUSY LED
Connect to ANODE of OK LED
Connect to CATHODE of OK LED
th
May 2008
41