KSZ8862-16_10 MICREL [Micrel Semiconductor], KSZ8862-16_10 Datasheet - Page 61

• Manufacturer Part Number: KSZ8862-16_10
• Description: 2-Port Ethernet Switch with Non-PCI Interface and Fiber Support
• Manufacturer: MICREL [Micrel Semiconductor]

Bank 3 Bus Configuration Register (0x08): BCFG
This register is a read-only register. The bit 0 is automatically downloaded from bit 0 Configparm word of EEPROM, if pin
EEEN is high (enabled EEPROM)
Banks 4 – 15: Reserved
Except Bank Select Register (0xE).
Bank 16 Transmit Control Register (0x00): TXCR
This register holds control information programmed by the CPU to control the QMU transmit module function.
Bank 16 Transmit Status Register (0x02): TXSR
This register keeps the status of the last transmitted frame.
Micrel, Inc.
August 2010
Bit
15-1
0
Bit
15
14
13
12-4
3
2
1
0
Bit
15-6
5-0
Default Value
0x0000
-
-
0x0
0x0
-
0x0
0x0
0x0
0x0
-
Default Value
Default Value
0x000
R/W
RO
RO
R/W
RO
RW
RW
RO
RW
RW
RW
RW
R/W
RO
RO
Description
Reserved
Bus Configuration (only for KSZ8862-16 device)
1: bus width is 16 bits.
0: bus width is 8 bits.
Description
Reserved
Reserved
Reserved
Reserved
TXFCE Transmit Flow Control Enable
When this bit is set, the QMU sends flow control pause frames from the host port if the RX
FIFO has reached its threshold.
Note: the SGCR3[5] in Bank 32 also needs to be enabled.
TXPE Transmit Padding Enable
When this bit is set, the KSZ8862M automatically adds a padding field to a packet shorter
than 64 bytes.
Note: Setting this bit requires enabling the ADD CRC feature to avoid CRC errors for the
transmit packet.
TXCE Transmit CRC Enable
When this bit is set, the KSZ8862M automatically adds a CRC checksum field to the end of
a transmit frame.
TXE Transmit Enable
When this bit is set, the transmit module is enabled and placed in a running state. When
reset, the transmit process is placed in the stopped state after the transmission of the
current frame is completed.
Description
Reserved
TXFID Transmit Frame ID
This field identifies the transmitted frame. All of the transmit status information in this
register belongs to the frame with this ID.
(this bit is only avaiable when EEPROM is enabled)
61
KSZ8862-16/32MQL
M9999-081310-3.1