mpc8536e Freescale Semiconductor, Inc, mpc8536e Datasheet - Page 106

• Manufacturer Part Number: mpc8536e
• Description: Mpc8536e Powerquicctm Iii Integrated Processor Hardware Specifications
• Manufacturer: Freescale Semiconductor, Inc

Clocking
2.22.0.1
The AC timing and voltage parameters must be verified at the measurement point, as specified within 0.2 inches of the package
pins, into a test/measurement load shown in
2.23
This section describes the PLL configuration of the MPC8536E. Note that the platform clock is identical to the core complex
bus (CCB) clock.
106
Clocking
Figure 70. Minimum Receiver Eye Timing and Voltage Compliance Specification
Compliance Test and Measurement Load
The reference impedance for return loss measurements is 50. to ground for both the D+ and
D- line (that is, as measured by a Vector Network Analyzer with 50. probes—see
Figure
measurement.
The allowance of the measurement point to be within 0.2 inches of the package pins is
meant to acknowledge that package/board routing may benefit from D+ and D– not being
exactly matched in length at the package pin boundary.
MPC8536E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 2
71). Note that the series capacitors, CTX, are optional for the return loss
Figure 71. Compliance Test/Measurement Load
Figure
71.
NOTE
NOTE
Freescale Semiconductor