S1D13700F02 Epson Electronics America, Inc., S1D13700F02 Datasheet - Page 60

• Manufacturer Part Number: S1D13700F02
• Description: Embedded Memory Graphics Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Page 60
bits 3-0
bit 7
bits 3-0
S1D13700F02
X42D-A-001-01
REG[15h] Cursor Width Register
Address = 8015h
REG[16h] Cursor Height Register
Address = 8016h
Cursor Mode
7
7
6
6
Default = 00h
Default = 00h
Note
Note
Cursor Width (CRX) bits[3:0]
These bits specify the width (or horizontal size) of the cursor, in pixels from the character
origin (see Figure 10-7 “Cursor Size and Position,” on page 59).
Cursor Mode (CM)
This bit determines the cursor mode. When graphics mode is selected, this bit must be set
to 1.
When this bit = 0, an underscore cursor ( _ ) is selected.
When this bit = 1, a block cursor (
Cursor Height (CRY) bits [3:0]
For an underscore cursor (REG[16h] bit 7 = 0), these bits set the location of the cursor, in
lines from the character origin (see Figure 10-7 “Cursor Size and Position,” on page 59).
For a block cursor (REG[16h] bit 7 = 1), these bits set the height (or vertical size) of the
cursor, in lines from the character origin (see Figure 10-7 “Cursor Size and Position,” on
page 59).
The cursor width must be less than or equal to the horizontal character size.
The vertical cursor size must be less than or equal to the vertical character size.
n/a
REG[15h] bits 3-0 = cursor width in pixels - 1
REG[16h] bits 3-0 = cursor height in lines - 1
(REG[16h] bits 3-0 <= REG[01h] bits 3-0)
(REG[16h] bits 3-0 <= REG[02h] bits 3-0)
n/a
5
5
4
4
Revision 1.01
) is selected.
3
3
Cursor Height bits 3-0
2
2
Cursor Width bits 3-0
Epson Research and Development
Hardware Functional Specification
1
1
Vancouver Design Center
Issue Date: 2005/11/29
Read/Write
Read/Write
0
0