ZL50110GAG Zarlink, ZL50110GAG Datasheet - Page 41

• Manufacturer Part Number: ZL50110GAG
• Description: CESoP Processor 552-Pin BGA Tray
• Manufacturer: Zarlink

Specifications of ZL50110GAG

• Package: 552BGA
• Maximum Data Rate: 1000 Mbps
• Transmission Media Type: Fiber Optic
• Power Supply Type: Analog
• Typical Supply Current: 950(Max) mA
• Typical Operating Supply Voltage: 1.8 V
• Minimum Operating Supply Voltage: 1.65 V
• Maximum Operating Supply Voltage: 1.95 V

M2_RXER
M2_CRS
M2_TXCLK
M2_TXD[3:0]
M2_TXEN
M2_TXER
M3_LINKUP_LED
M3_ACTIVE_LED
Signal
Signal
Note: This port must not be used to receive data at the same time as port 3,
Note: This port must not be used to receive data at the same time as port 2,
Table 12 - MII Port 2 Interface Package Ball Definition (continued)
I/O
I/O
I D
I D
I U
O
O
O
O
O
Table 13 - MII Port 3 Interface Package Ball Definition
AC24
AC25
AD26
[3]
[2]
AC22
AB20
G24
AB26
MII Port 2 - ZL50111 and ZL50112 variants only.
AE25
AD23
MII Port 3 - ZL50111 variant only
Package Balls
Package Balls
they are mutually exclusive.
they are mutually exclusive.
ZL50110/11/12/14
Zarlink Semiconductor Inc.
[1]
[0]
41
AC21
AE24
Receive Error. Active high signal indicating
an error has been detected. Normally valid
when M2_RXDV is asserted. Can be used
in conjunction with M2_RXD when
M2_RXDV signal is de-asserted to indicate
a False Carrier.
Carrier Sense. This asynchronous signal is
asserted when either the transmission or
reception device is non-idle. It is active
high.
MII only - Transmit Clock
Accepts the following frequencies:
Transmit Data. Clocked on rising edge of
M2_TXCLK.
Transmit Enable. Asserted when the MAC
has data to transmit, synchronously to
M2_TXCLK with the first pre-amble of the
packet to be sent. Remains asserted until
the end of the packet transmission. Active
high.
Transmit Error. Transmitted synchronously
with respect to M2_TXCLK, and active high.
When asserted (with M2_TXEN also
asserted) the ZL50110/12 will transmit a
non-valid symbol, somewhere in the
transmitted frame.
LED drive for MAC 3 to indicate port is
linked up.
Logic 0 output = LED on
Logic 1 output = LED off
LED drive for MAC 3 to indicate port is
transmitting or receiving packet data.
Logic 0 output = LED on
Logic 1 output = LED off
25.0 MHz
MII
Description
Description
100 Mbps
Data Sheet