CY8CTMG200-32LQXI Cypress Semiconductor Corp, CY8CTMG200-32LQXI Datasheet - Page 163

• Manufacturer Part Number: CY8CTMG200-32LQXI
• Description: IC MCU 32K FLASH 32UQFN
• Manufacturer: Cypress Semiconductor Corp
• Series: TrueTouch™r

Specifications of CY8CTMG200-32LQXI

• Program Memory Type: FLASH (32 kB)
• Package / Case: 32-UQFN Exposed Pad, 32-HUQFN, 32-SQFN
• Applications: Touchscreen Controller
• Core Processor: M8C
• Controller Series: CY8CT
• Ram Size: 2K x 8
• Interface: I²C, SPI, UART/USART, USB
• Number Of I /o: 28
• Voltage - Supply: 1.8 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Processor Series: CY8CTxx2xx
• Core: M8C
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 24 MHz
• Number Of Timers: 3
• Operating Supply Voltage: 1.71 V to 5.5 V
• Mounting Style: SMD/SMT
• Program Memory Size: 32 KB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1000 - ISP 4PORT FOR CYPRESS PSOC MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2954

19.2
The following registers are associated with the Programmable Timer and are listed in address order. The register descriptions
have an associated register table showing the bit structure for that register. The bits in the tables that are grayed out are
reserved bits and are not detailed in the register descriptions that follow. Reserved bits must always be written with a value of
‘0’. For a complete table of programmable timer registers, refer to the
page
19.2.1
The
(PT0_CFG) configures the PSoC’s programmable timer.
Bit 2: CLKSEL. This bit determines if the timer runs on the
32 kHz clock or CPU clock. If the bit is set to 1'b1, the timer
runs on the CPU clock, otherwise, the timer runs on the 32
kHz clock.
Bit 1: One Shot. This bit determines if the timer runs in
one-shot mode or continuous mode. In one-shot mode the
timer completes one full count cycle and terminates. Upon
termination, the START bit in this register is cleared. In con-
tinuous mode, the timer reloads the count value each time
upon completion of its count cycle and repeats.
19.2.2
The
(PT1_CFG) configures the PSoC’s programmable timer.
Bit 2: CLKSEL. This bit determines if the timer runs on the
32 kHz clock or CPU clock. If the bit is set to 1'b1, the timer
runs on the CPU clock, otherwise, the timer runs on the 32
kHz clock.
Bit 1: One Shot. This bit determines if the timer runs in
one-shot mode or continuous mode. In one-shot mode the
timer completes one full count cycle and terminates. Upon
termination, the START bit in this register is cleared. In con-
tinuous mode, the timer reloads the count value each time
upon completion of its count cycle and repeats.
PSoC CY8CTMG20x and CY8CTST200 TRM, Document No. 001-53603 Rev. *C
0,B0h
0,B3h
Address
Address
106.
Programmable
Programmable
Register Definitions
PT0_CFG
PT1_CFG
PT0_CFG Register
PT1_CFG Register
Name
Name
Timer
Timer
Bit 7
Bit 7
Configuration
Configuration
Bit 6
Bit 6
Bit 5
Bit 5
Register
Register
Bit 4
Bit 4
Bit 0: START. This bit starts the timer counting from a full
count. The full count is determined by the value loaded into
the data registers. This bit is cleared when the timer is run-
ning in one-shot mode upon completion of a full count cycle.
For additional information, refer to the
page
Bit 0: START. This bit starts the timer counting from a full
count. The full count is determined by the value loaded into
the data registers. This bit is cleared when the timer is run-
ning in one-shot mode upon completion of a full count cycle.
For additional information, refer to the
page
221.
224.
Summary Table of the System Resource Registers on
Bit 3
Bit 3
CLKSEL
CLKSEL
Bit 2
Bit 2
One Shot
One Shot
Bit 1
Bit 1
PT0_CFG register on
PT1_CFG register on
Programmable Timer
START
START
Bit 0
Bit 0
Access
Access
RW : 0
RW : 0
163
[+] Feedback