EP3C25F324I7 Altera, EP3C25F324I7 Datasheet - Page 110

• Manufacturer Part Number: EP3C25F324I7
• Description: IC CYCLONE III FPGA 25K 324 FBGA
• Manufacturer: Altera
• Series: Cyclone® IIIr

Specifications of EP3C25F324I7

• Number Of Logic Elements/cells: 24624
• Number Of Labs/clbs: 1539
• Total Ram Bits: 608256
• Number Of I /o: 215
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 324-FBGA
• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 24624
• # I/os (max): 215
• Frequency (max): 437.5MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 24624
• Ram Bits: 608256
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: FBGA
• For Use With: 544-2370 - KIT STARTER CYCLONE III EP3C25
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

6–10
On-Chip Series Termination Without Calibration
Cyclone III Device Handbook, Volume 1
Figure 6–4
the associated OCT calibration circuitry.
Figure 6–4. Cyclone III Device Family On-Chip Series Termination with Calibration Setup
RUP and RDN pins go to a tri-state condition when calibration is completed or not
running. These two pins are dual-purpose I/Os and function as regular I/Os if you
do not use the calibration circuit.
The Cyclone III device family supports driver impedance matching to the impedance
of the transmission line, which is typically 25 Ω or 50 Ω. When used with the output
drivers, OCT sets the output driver impedance to 25 Ω or 50 Ω. The Cyclone III device
family also supports I/O driver series termination (R
SSTL-18.
shows the external calibration resistors setup on the RUP and RDN pins and
Cyclone III Device Family OCT with
Calibration with RUP and RDN pins
Calibration
Circuitry
OCT
V
CCIO
Chapter 6: I/O Features in the Cyclone III Device Family
RUP
RDN
S
= 50 Ω) for SSTL-2 and
V
GND
CCIO
© December 2009 Altera Corporation
External
Calibration
Resistor
External
Calibration
Resistor
OCT Support