MT9P401I12STC Aptina LLC, MT9P401I12STC Datasheet - Page 45

• Manufacturer Part Number: MT9P401I12STC
• Description: SENSOR IMAGE CMOS 5MP 48LCC
• Manufacturer: Aptina LLC
• Type: CMOS Imagingr
• Series: DigitalClarity®r

Specifications of MT9P401I12STC

• Pixel Size: 2.2µm x 2.2µm
• Active Pixel Array: 2592H x 1944V
• Frames Per Second: 60
• Voltage - Supply: 2.6 V ~ 3.1 V
• Package / Case: 48-iLCC
• Sensor Image Color Type: Monochrome
• Sensor Image Size: 2592x1944Pixels
• Operating Supply Voltage (typ): 1.8/2.8V
• Operating Supply Voltage (max): 3.1V
• Operating Temp Range: -30C to 70C
• Package Type: ILCC
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 557-1263; MT9P401I12STC; Q3412742

Restart
PDF: 09005aef82acb06f/Source: 09005aef81a4a477
MT9P401_DS_2 - Rev. B 9/07 EN
Note:
Fields not identified as being frame-synchronized or affected by synchronize_changes
are updated immediately after the register write is completed. The effect of these regis-
ters on the next frame can be difficult to predict if they affect the shutter pointer.
To restart the MT9P401 at any time during the operation of the sensor, write a “1” to the
restart register (R0x0B[0] = 1). This has two effects: first, the current frame is interrupted
immediately. Second, any writes to frame-synchronized registers and the shutter width
registers take effect immediately, and a new frame starts (in continuous mode). Register
updates being held by synchronize_changes do not take effect until that bit is cleared.
The current row and one following row complete before the new frame is started, so the
time between issuing the Restart and the beginning of the next frame can vary by about
t
If Pause_Restart is set, rather than immediately beginning the next frame after a restart
in continuous mode, the sensor pauses at the beginning of the next frame until
Pause_Restart is cleared. This can be used to achieve a deterministic time period from
clearing the Pause_Restart bit to the beginning of the first frame, meaning that the
controller does not need to be tightly synchronized to LV or FV.
ROW.
When Pause_Restart is cleared, be sure to leave Restart set to “1” for proper opera-
tion. The Restart bit will be cleared automatically by the device.
Micron Confidential and Proprietary
MT9P401: 1/2.5-Inch 5Mp Digital Image Sensor
45
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2007 Micron Technology, Inc. All rights reserved.
Features