NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 347

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Operation
338
Using the Alarm List/History Function
Reference: The image and library codes are different when NT30/620 compatible mode is
1, 2, 3...
being used.
• String Table Entry:
• Image/Library Code:
• Screen No.
Alarm List/History
Register an alarm list/history to a screen in the manner described below (for in-
formation not indicated below, set as needed.).
• Alarm list
• Alarm history
1. Initialize the recorded alarm history record data as needed.
2. Display the screen where the alarm list/history is registered.
Table No. (0 to 1999) of the character string memory table to be displayed as a
message
Image/library code displayed together with a message
• 0000
• 0001
• 1000
Screen No. (0001 to 3999) of the screen to be displayed when the message
is pressed twice.
This setting is valid only when switching the screen.
• Start bit table entry:
• No. of bits referenced:
• Type: Order of frequency or order of occurrence
To display the alarm history in the order of occurrence, set the display order
(From Old Data/From New Data) of the record data using the Hist. Disp.
Method memory switch of the PT.
To initialize the alarm history record data using System Menu operation, se-
lect Alarm History on the MEMORY INIT. MENU screen.
To initialize the alarm history record data by operation at the PT status con-
trol area, change the status of bit 1 in the 4th word (word n + 3) from the be-
ginning of the PT status control area to 1 (ON).
After initializing the alarm history record data by operation at the PT status
control area, return the status of bit 1 to 0 (OFF).
In the case of an alarm history, the recorded data is displayed on the screen.
In the case of an alarm list, the content of the set character string memory
table is displayed as a message if the status of the bit in the host to be moni-
tored changes to 1 (ON).
Table No. of the first bit memory table among the bit memory tables where
the bits in the host to be monitored are registered.
The number of the bit memory tables where the bits in the host to be moni-
tored are registered.
H
H
H
:
to 0FFF
to 3FFF
H
H
:
:
No display
Image
Library
Section
3-8