NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 17

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

*1: These functions are available only in V2 versions of the NT31/NT31C.
*2: This is the capacity of the flash memory that stores screen data.
*3: The values are the same as the NT30/NT30C when the PT is in NT30/620 compatible mode.
*4: The window control area can be used only in the Vj versions of the NT31/NT31C.
*5: These data areas are accessible only when the PT is connected to the CS1 PC in a 1:N NT Link. (They are not
Differences between the NT620S/NT620C/NT625C and NT631/NT631C
8
Functions of the NT31/NT31C and NT631/NT631C
Recipe function
Accessible CS1 PC data areas
Compatible Support Tool(s)
DIP switches
Use of memory unit
RS-232C interface
RS-422A/485 interface
Replacement backlight
NT631/NT631C system program
data
High-speed 1:N NT Link
Memory
Li k
Link
LCD contrast adjustment
Backlight brightness adjustment
Number of user-registered screens
Screen data capacity*2
(User program memory)
Numeral string data
Character string data
Bit data
Mathematical table
accessible through host link communications.)
y
System program
Screen data
Item
Item
For differences in programming, refer to Appendix B Compatibility with Screen
Data of Other PT Models on page 429.
NT-ZJCAT1-EV4 or
NT-ZA3AT-EV2
On rear of unit
Not possible
Connector (9-pin) also used as port for
screen data transfer.
NT620S/NT620C: None
NT625C: Terminal block (Select
RS-232C or RS-422A/485 with the DIP
switch.)
NT620C-CFL01 (NT620C)
NT610C-CFL02 (NT625C)
NT620-ZS3PC/ZS3DV-EV1
(including system installer)
Not possible
Exclusive use by Memory Link
Shared with OMRON connection
By a control on the rear of the unit
Not possible
2,000 max.
NT620S: 512 KB
NT620C/NT625C: 1 MB
1,000 max.
1,000 max.
256
None
None
---
NT620S/NT620C/NT625C
NT30/NT30C
Possible
The data areas listed below can be
accessed in addition to the data areas
accessible with the NT30/NT30C.
- EM banks (EM_0 to EM_C)
- Timer completion flags (TU)
- Counter completion flags (CU)
- Work Area (WR)
- Task flags (TK)
- HR Area
NT-ZJCAT1-EV4
None (software settings)
Possible
- Serial port A connector (also used
- Serial port B connector (for host
Terminal block (A memory switch can
set the RS-232C connector as serial
port B.)
NT631C-CFL01 (for ST151)
NT631C-CFL02 (for ST141)
The system installer and system
program data are supplied with the
Support Tool.
Possible
Same as OMRON connection
Exclusive use by Memory Link
Adjustable with touch panel operation.
(NT631-ST141j-V2 only)
Adjustable with touch panel operation.
(NT631-ST141j-V2 only)
3,999 max.
1 MB
2,000 max.
2,000 max.
1,000 max.
256 max.
Calculations can be executed
automatically in the PT.
for screen data transfer, 9-pin)
communications only, 25-pin)
*1
*1
NT631/NT631C
NT31/NT31C
Section
*1
*5
1-2