NT30-KBA04 Omron, NT30-KBA04 Datasheet - Page 131

• Manufacturer Part Number: NT30-KBA04
• Description: ANTI GLARE COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA04

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

122
Touch Switches
Reference:
S When a screen with a number other than those indicated below is allocated to
S The screen can also be switched by PT status control area operation (page
S To display an overlapping screen, specify the screen number of the parent
The SR Area of the CVM1 and CV-series PCs is allocated to system functions,
and it cannot be used for purposes other than system use.
The range of each memory area differs according to the PC. Refer to Appendix D
PC Memory Maps on page 429.
When a DM Area or EM Area address is specified, add a bit number (00 to 15) to
the end of the word address.
Screen Switching Function
This function allows the screen to be switched by touch switch operation at the
PT, without instructions from the host.
When this function is used, the screen to be displayed is set for the touch switch.
When the touch switch is pressed, the display switches to the set screen (at this
time, the new screen number is notified via the PT status notify area).
The attributes for screen switching are as follows.
Specified Screen Number and Display Operation
The display operation at the PT depends on the specified screen number, as fol-
lows.
*3: The EM Area current bank cannot be used in CS1-series PCs when a 1:N NT
a touch switch, the screen does not switch and the currently displayed screen
remains displayed.
289), by bit memory table operation (page 291), and by the alarm/history func-
tion (page 292).
screen.
Settings
• Screen Nos. 1 to 3999
• Screen No. 9001
• Screen No. 9002
• Screen No. 9020
Link (standard or high-speed) is being used through a Serial Communications
Board or Serial Communications Unit. An error will occur during PT operation if a
bit is specified in a CS1-series PC’s EM current bank.
Screen No.
The display switches to the screen with the specified screen number. The
screen number of the newly displayed screen is notified to the host.
The display history (occurrence order) screen is displayed. Screen num-
ber 9001 is notified to the host.
The display history (frequency order) screen is displayed. Screen number
9001 is notified to the host.
The Programming Console screen is displayed. Screen number 9020 is
notified to the host.
This makes it possible to use the Programming Console function even in
the RUN mode.
(However, the Programming Console function can be used only when the
PT is connected to a PC which can use the Programming Console func-
tion.) The RUN mode is cancelled while the programming function is being
used. Also, monitoring of PT control area, data logging function is not
executed. To return from the Programming Console function, exit this
function, by PT operation. (It is not possible to exit this function from the
host.)
Screen number of newly displayed screen
1 to 3999, 9001, 9002, 9020 to 9023, 9030, 9999
Section
2-7