NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 59

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

50
Areas for Control/Notification
Reference:
Reference:
S The screen number is notified only when the screen is switched by operation
S When an overlapping screen is displayed, the screen number of the parent
S When the PT is set to NT30/620 compatible mode, the screen switch setting
S What is designated here is the memory table number only. The type of
S Copying is not executed just be writing the memory table numbers. It is
S Since the memory table numbers start from 0, if there are 2000 memory tables,
S When the PT is set to NT30/620 compatible mode, copying between memory
Copy Source/Copy Destination Memory Table Numbers
Designate the memory table numbers of the copy source and copy destination
memory tables as 4-digit BCD or hexadecimal values, when copying data be-
tween memory tables in the PT. Whether the values are BCD or hexadecimal is
determined by the setting for numeral storage type in the PT configuration set-
tings made with the Support Tool.
The memory table numbers that can be designated are indicated in the table be-
low.
Note that it is only possible to copy between the following combinations.
• A numeral memory table and a numeral memory table
• A character string memory table and a character string memory table
at the PT.
screen is notified.
notification from the PT occurs in the first word (word m) of the PT status notify
area. Refer to Appendix C for details on the NT30/620 compatible mode.
memory table (numeral/character string) is set by the memory table copy type
bit in the PT status control bits.
executed when the memory table copy execution bit in the PT status control
bits is turned ON.
the range is 0 to 1999, and if there are 1000, the range is 0 to 999.
tables is performed differently. Refer to Appendix C for details on the NT30/620
compatible mode.
0001 to 1999
BCD
0000 to 07CF
Hexadecimal
Memory table numbers 0 to 1,999
Numbers
Section
2-2