NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 40

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1-6
Before Operating
Before Operating
Create the host program.
Set the host settings.
Reference:
Connect to the
NT31/NT31C or
NT631/NT631C.
Host
*1: System program installation is only done in special circumstances, for example
*2: Display of the system menu, and all change operations, can be disabled to prevent
S For the system program, use the NT31/NT31C or NT631/NT631C system
S For the Support Tool, use NT-series Support Tool for Windows 95/98 (Ver. 4.1).
Follow the procedure given below to start the system of the NT31/NT31C or
NT631/NT631C.
Refer to the following manuals for the Units and software.
Start operation.
program supplied as an accessory with the NT series Support Tool (NT-
ZJCAT1-EV4).
when changing the system program, or to recover the original status of the
installed program. This operation is not normally necessary. When using other PC
models (sequencers), however, it is necessary to install specific system programs.
the accidental deletion or alteration of screens and settings.
Install the system program.
Connect the power supply.
Set the memory switches.
Make the settings in the
system installer mode.
Confirm the settings and
check communication.
Connect to the host.
Install the PT in the
operation panel.
NT31/NT31C or
NT631/NT631C
Transmit the screen data.
*2
*1
Install the Support
Tool at the computer.
Create the screens.
Support Tool
(refer to the manual for
the Support Tool)
(refer to Sections
2through 5 and the
Support Tool manual)
Section
1-6
31