NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 361

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Setting
Operation
3-11 Printing Data and Checking the Printer Status
Checking the Printer Operating State
3-11-1 Printing the Screen
352
Printing Data and Checking the Printer Status
15
14
0
Reference:
13
Reference: When NT30/620 compatible mode is being used, the current screen number oc-
12
11
10
0
9
S In addition to the hard copy of the screen, some kinds of data can be output to a
S The Printer Controller and Print Method used by the PT for printing are set by
cupies the first word of the PT status notify area and the words containing the
updated memory table number and PT status notify bits are shifted down one
word (page 441).
The following data below can be output to a printer connected to the PT while the
PT is operating.
• Hard copy of the screen
The status of the printer connected the PT can be checked from the host.
This section describes the procedure for printing data during operation and also
the procedure for checking the printer operating status.
The printer operating status information in the PT status notify area indicates
whether the printer is operating or not.
The PT status notify area must be allocated to a word in the host, accordingly, no
special settings are required for reading the status.
The bit used to notify the PT status (PT status notify bit) is provided at the second
word (word m + 1) from the beginning in the PT status notify area.
To check the operating status of the printer, operate the PT status notify area in
the manner shown below.
Read the second word (word m + 1) from the beginning in the PT status notify
area. Bit 7 in the PT status notify bits shows the operating status of the printer.
• 0 (OFF): Stopped
• 1 (ON): Printing
With the PT, the screen currently displayed can be printed by using either of the
procedures indicated below.
0
printer using the System Menu. For details of printing using the System Menu,
refer to Displaying and Printing the Display History Record and Displaying
and Printing the Alarm History Record in section 6 in the Setup Manual .
the memory switches on the PT.
8
7
6
5
4
3
2
0
1
0
0
0
15
13
12
11
10
7
6
5
4
3
Bit
PT operation status
Battery status
Screen switch strobe
Numeral setting strobe flag
Character string setting strobe flag
Printer operating status
Backlight status
Global window open status
Local window1 open status
Local window2 open status
Notified Information
Printing
1 (ON)
Open
Open
Open
Run
Low
Off
Lit/Flashing
Stopped
0 (OFF)
Normal
Closed
Closed
Closed
Section
Stop
3-11