NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 412

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Example:
Example:
Enabling and Disabling a Touch Switch with an Interlock Bit
Examples of Actual Applications of Direct Access
1, 2, 3...
• If character string memory tables No. 0 to No. 6 are used for other applications
Storing Sun to Sat in character string memory tables No. 200 to 206.
Adding 200 to the contents of numeral memory table No. 253 enables indirect
specification of the character string memory tables that store Sun to Sat.
While the system is setting up or initializing, the guide characters Please wait are
displayed on the touch switch and the touch switch’s operation is disabled.
When the system is ready, the guide characters Ready are displayed on the
touch switch and the touch switch’s operation is enabled.
Register a touch switch with settings like those indicated below in the screen.
With the settings above, the touch switch display will change according to the
operating status of the equipment and the touch switch’s operation will be en-
abled/disabled as well.
Suggestions
• The interlock function allows individual inputs (numeral or character string)
1. Copy the contents of numeral memory table 253 to a number that can be
2. To achieve correspondence between the numbers of the character string
3. Display the day of the week indirectly by following the example above.
at the same time as they are used to display the day of the week.
and touch switches to be enabled/disabled from the PC. (See Disabling T ouch
Switches with Interlock Bits on page 357 for details.)
Character string memory table
allocated to a PC word by using the memory table copy function.
memory tables that store Sun to Sat and the contents of numeral memory
table No. 253 (0 to 6), add a constant.
• PC address of lamp bit: Bit address of the bit in the PC that indicates op-
• Guide character display:Check mark set, ON/OFF switching character
• Interlock:
• PC address of interlock bit:
Initial value
Please wait
Ready
erating status of the equipment. (OFF during set
up or initialization and ON when ready.)
strings, guide characters Please wait when lamp
is not lit, guide characters Ready when lamp is lit
Check mark set
Bit address of the bit in the PC that indicates op-
erating status of the equipment. (OFF during set
up or initialization and ON when ready.)
PT
Sun
200
Input disabled
when OFF
Input enabled
when ON
Mon
201
202
Tue
Wed
203
Interlock bit
PC
Section
Thu
204
205
Fri
206
Sat
403
5-1