NT30-KBA01 Omron, NT30-KBA01 Datasheet - Page 163

• Manufacturer Part Number: NT30-KBA01
• Description: CHEMICAL RESISTANT COVER FOR NT31
• Manufacturer: Omron

Specifications of NT30-KBA01

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Display Functions
Input Functions
Output Functions
Function Outline
2-10-3 Broken Line Graphs
154
Graphs
shaped analogue meter will be drawn.
Default value for width rate is set to 100%. With default status, therefore, donut-
shaped analogue meter will not be drawn since there will be no inner circle.
Scale Distance and Scale Length
Specify the scale position and scale length in % format regarding the radius as
100%.
Analogue meters indicate numeric values in accordance with the General set-
tings. For details on the method of display depending on the General settings,
refer to Common Attributes (page 149).
Analogue meters have no input functions.
Analogue meters have no output functions.
Broken line graphs represent the contents of multiple consecutive numeral
memory tables as one broken line. They enable the values of consecutive nu-
meral memory tables to be taken in at a glance.
Scale distance (0% to 150%) :
Specify the distance from the center of an analogue meter in % format re-
garding the radius as 100%.
0%
50%
100% Scale appears on circumference of an analogue meter.
110%
ter.
Scale length (10 to 110%) :
Specify the length from the scale position in % format regarding the radius
as 100%.
No. of Division : Specify the number of the division which the scale should be
divided for the range from 0 to 100%.
Since it specifies the number of division which the scale should be divided,
No. of Division +1 scale lines are drawn.
Also, when Display Sign is ON, the same number of scale lines are drawn
both for -100% to 0% and 0% to 100% range. Therefore, for -100% to 100%
range, designated No. of division x2 is applied.
Example) No. of Division =
Width rate
Display Sign is OFF
Center
None (Scale appears from center point of an analogue meter)
Scale appears inside the analogue meter.
Scale appears 10% outside the circumference of an analogue me-
Scale distance
Radius
Scale length
Width rate
Display Sign is ON
Center
Scale distance
Radius
Section
Scale length
2-10