UPD70F3714GC-8BS-A Renesas Electronics America, UPD70F3714GC-8BS-A Datasheet - Page 131

• Manufacturer Part Number: UPD70F3714GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3714GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
(7) Clock monitor mode register (CLM)
Cautions 1. The CLME bit is cleared to 0 only after reset.
The CLM register sets the clock monitor operation mode. It can be written only in a combination of specific
sequences (see 3.4.7 Special registers).
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
2. When the CLME bit = 1, the clock monitor function is forcibly stopped if the following
3. When the CLME bit = 1, output of the timer for motor control goes into a high-impedance
4. When writing to the CLM register, use command register PRCMD.
After reset: 00H
CLM
conditions are satisfied.
• During oscillation stabilization time count after release of STOP mode
state if oscillation (f
See Figure 9-4 for the target timer output.
CLME
0
0
1
Clock monitor operation disabled
Clock monitor operation enabled
R/W
0
X
) stop is detected.
CHAPTER 5 CLOCK GENERATOR
Address: FFFFF870H
User’s Manual U17716EJ2V0UD
0
Clock monitor operation control
0
0
0
0
CLME
129