HD64F3048F16 Renesas Electronics America, HD64F3048F16 Datasheet - Page 547

• Manufacturer Part Number: HD64F3048F16
• Description: IC H8 MCU FLASH 128K 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048F16

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 70
• Interface Type: SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit 2—Smart Card Data Inverter (SINV): Inverts data logic levels. This function is used in
combination with bit 3 to communicate with inverse-convention cards. SINV does not affect the
logic level of the parity bit. For parity settings, see section 14.3.4, Register Settings.
Bit 1—Reserved: Read-only bit, always read as 1.
Bit 0—Smart Card Interface Mode Select (SMIF): Enables the smart card interface function.
14.2.2
The function of SSR bit 4 is modified in the smart card interface. This change also causes a
modification to the setting conditions for bit 2 (TEND).
Bit 2: SINV
0
1
Bit 0: SMIF
0
1
Bit
Initial value
Read/Write
Note: * Only 0 can be written, to clear the flag.
Serial Status Register (SSR)
R/(W) *
TDRE
Description
Unmodified TDR contents are transmitted
Received data is stored unmodified in RDR
Inverted TDR contents are transmitted
Received data is inverted before storage in RDR
Description
Smart card interface function is disabled
Smart card interface function is enabled
7
1
R/(W) *
RDRF
6
0
R/(W) *
ORER
Error signal status (ERS)
Status flag indicating that an
error signal has been received
5
0
R/(W) *
ERS
0
4
Rev. 3.00 Sep 27, 2006 page 519 of 872
R/(W) *
PER
3
0
Transmit end
Status flag indicating
end of transmission
Section 14 Smart Card Interface
TEND
R
2
1
MPB
REJ09B0325-0300
R
1
0
(Initial value)
(Initial value)
MPBT
R/W
0
0